any nsx owner in the tricity fremont/union city/newark area?

[tbkonwso]

Hi , looking for someone with a oem body in the tricity area?i will take 5 min of your time to test fit a side skirt i'm working on.

it won't damage you car paint or anything just a mock up from the bottom.

i can buy dinner? lol

Thank you..

plz txt me for fast response 5105856215 Evan

 

[tbkonwso]

hi you guys,

i finished making the side skirts and would love it if any nsx guys can help me test fit them.

here is picture of the final product.

i took some measurement from a fellow prime owners (Thank you so much btw)

now i just want to see the final product on a nsx , they should bolt onto your oem side skirts from the bottom.

you will never have to touch your oem door and body panel this way.

Please let me know if you can help.

Thanks again guys

Untitled by tbkonwso1, on Flickr

 

[Mikexike]

hi you guys,

i finished making the side skirts and would love it if any nsx guys can help me test fit them.

Here is picture of the final product.

I took some measurement from a fellow prime owners (thank you so much btw)

now i just want to see the final product on a nsx , they should bolt onto your oem side skirts from the bottom.

You will never have to touch your oem door and body panel this way.

Please let me know if you can help.

Thanks again guys

untitled by tbkonwso1, on flickr

to bad i'm too far... I'd help you out but i'm in sacramento.

 

[tbkonwso]

thank you Eric!! for letting me test these on your car.

here is couple picture we were able to snap before my phone went dead =\

Nsx fitment by tbkonwso1, on Flickr

these are mold from the rx7 feed side splitter but lengthened for the nsx.

they use 3m vhb tape to mount and self taping screw from the bottom of your oem side skirt.

it has a step look as appose to the straight cut to give more of an aggressive look.

 

[B2FiNiTY]

So you gotta drill a holes into your stock side skirts to mount them?

 

[tbkonwso]

So you gotta drill a holes into your stock side skirts to mount them?

its an universal application.

i used vhb tape and two self taping screws on my fd and supra.

since i no longer have an nsx i cant really make an install guide.

but i checked the bottom of the nsx and install should be real easy. you can just drill a pilot hole the old mounting points for the oem sides so that way it can be a cleaner install.