bLodisign Diffuser on 02+ rear valance

[blodi]

Just wanted to post some pictures for a member that sent them to me of the bLodisign Diffuser mounted on his 02+ rear valance. This diffuser was not originally intended for the newer valances, but as luck would have it can be bolted up. The only thing is that different bolts and washers need to be used.

"The bolt I used was 2" but I think that you can use the factory bolt that is 1.50"as I had too much thread sticking through when tightened. The washers I used measured 7/8th of an inch across with a thickness of two used together of 3/16"."

Here are the pics...

 

[DRIFTER]

Do you need to drill any holes or permanently modify the 02 valance to make this fit?

 

[blodi]

Do you need to drill any holes or permanently modify the 02 valance to make this fit?

Nope, just remove the existing screws that are already on the bottom of the valance and that is where the diffuser bolts up.

 

[B-rad]

The Diffuser looks great as the above pictures show on my car and is durable. It took me about 5 minutes to install it on my '02 rear valance.