Happy New Year!!
$250 Sale Extended!! Get one now to use later!!
I am working on getting the drivers once again for you guys to keep the cost down. I just ordered the gills needed to protect the V3 driver. So, get with me by pm to get you the details!
The shop will be extending the gift of a reduced price on either the V2 or the V3 Sub Enclosure. Get yours now to use in the spring! Picked up or shipped!
If wanted custom paint can be done to match your interior. Ask for info!
I will offer them empty for you to do your own set up.
Or I can assemble and get it ready for you to install. PM for info!
$250 shipped in the 48 US! You can get either the V3 designed to not loose any foot space and holds the shallow mount SWS10 made by Earthquake or maybe the like. Has about .35 cu. ft. of air space!
I am also able to remake tooling to offer the V3 with a flat front but will have to have a hole to allow for fabrication. But, you can mount your own sub size. From an 8" to maybe a 12" depending on depth. You cut as you need! Will be very strong so no flex issues! I need to see demand for this to make the new design. It will increase the air space quite a bit. But, the speaker will be further out and flush with the front. So, you will have to set up a way to protect the driver from feet! This style will be $50 more to get unless get lots of orders. These need to be ordered and paid in advance to change tooling!
Or you can get the Classic V2 designed to hold the JL10W1 or the 10W3 with a spacer, or similar. Also $250 shipped in the lower 48 US! has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passenger side, if that matters!
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman
$250 Sale Extended!! Get one now to use later!!
I am working on getting the drivers once again for you guys to keep the cost down. I just ordered the gills needed to protect the V3 driver. So, get with me by pm to get you the details!
The shop will be extending the gift of a reduced price on either the V2 or the V3 Sub Enclosure. Get yours now to use in the spring! Picked up or shipped!
If wanted custom paint can be done to match your interior. Ask for info!
I will offer them empty for you to do your own set up.
Or I can assemble and get it ready for you to install. PM for info!
$250 shipped in the 48 US! You can get either the V3 designed to not loose any foot space and holds the shallow mount SWS10 made by Earthquake or maybe the like. Has about .35 cu. ft. of air space!
I am also able to remake tooling to offer the V3 with a flat front but will have to have a hole to allow for fabrication. But, you can mount your own sub size. From an 8" to maybe a 12" depending on depth. You cut as you need! Will be very strong so no flex issues! I need to see demand for this to make the new design. It will increase the air space quite a bit. But, the speaker will be further out and flush with the front. So, you will have to set up a way to protect the driver from feet! This style will be $50 more to get unless get lots of orders. These need to be ordered and paid in advance to change tooling!
Or you can get the Classic V2 designed to hold the JL10W1 or the 10W3 with a spacer, or similar. Also $250 shipped in the lower 48 US! has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passenger side, if that matters!
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman
Last edited: