Does anyone know of a rear camber kit or possibly offset bushings I can use on the rear of my 1994 nsx?I just lowered the car and I need less camber.Any and all help would be [email protected]
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
HELP!HR lowered and need less rear camber
- Thread starter buddyatlga
- Start date
Search this site and ye shall find, but the short answer is that there is not yet such a kit for the rear. Comptech has a kit for the fronts to increase negative that could (probably) be turned 180 to decrease negative. For the H&Rs I suggest aluminum rings slid over the shock tube to rest where the removable lower perch normally sets, then slide the perch back on to rest on the ring. By raining the car in this way by 1/2 inch you will be able to get a more reasonable camber setting and still be pretty low. Personally I would use slightly thinner rings (/8 - 1/4 less) on the front than the rears.
I’ve been thinking of having some rings made if there is any interest from others. I would pass them on for exactly what they cost but the price would come down with several sets.
I’ve been thinking of having some rings made if there is any interest from others. I would pass them on for exactly what they cost but the price would come down with several sets.
Similar threads
