HOT! gaugeART Video Gauge Adapter

ScienceofSpeed · 21 December 2013

gaugeART Video Gauge Adapter

ScienceofSpeed is pleased to release the gaugeART Video Gauge Adapter for the AEM EMS. This is one of the hottest and most innovative products we've come across in the past twelve years.

The system interfaces with the AEM EMS (including Series 2 units currently sold by ScienceofSpeed, as well as every Series 1 EMS sold in the past) to produce a video image of gauges that can be displayed on an in-dash navigation system screen, or on a separate standalone video display, like one mounted in a Honda navigation pod.

The gaugeART Video Gauge Adapter can display any parameter from the ECU. Data can be displayed digitally, as a circular gauge, or a horizontal or bar graph. The system comes with several standard designs, however, the best feature is http://designer.gaugeART.com - a website that is used to create an unlimited number of gauge designs. You're limited only by your imagination. The system also supports external fluid pressure sensors and fluid temperature sensors for monitoring things like oil temperature, oil pressure, and fuel pressure. Unlike the discontinued HKS CAMP, the gaugeART adapter allows completely customizable displays.

for more information, please see our website:
http://scienceofspeed.com/products/engine_performance_products/NSX/gaugeART/video_gauge_adapter/

or the frequently asked questions at gaugeART.com:
http://gaugeart.com/forum/viewforum.php?f=4&sid=7d211f576b1e94610c5f9e0ec6890758

95gsrturbo · 21 December 2013

Wow nice! Cost?

SaleenS7Rs · 21 December 2013

Its 525 just check out SOS site.

bngl3rt · 21 December 2013

EMS only? No FIC?

- - - Updated - - -

And/or does it need an AEM box at all? It says it connect directly to sensors...

Ko-nsx · 21 December 2013

very nice!

makija · 21 December 2013

And it will work with sos nav pod housing ? If so i want one

ScienceofSpeed · 21 December 2013

bngl3rt said:
EMS only? No FIC?

- - - Updated - - -

And/or does it need an AEM box at all? It says it connect directly to sensors...

AEM EMS is required, other ECUs to be offered. FIC will not work, because it lacks data output. The sensors are installed to the EMS, which outputs the sensor output through the data stream to the gaugeART video adapter.

- - - Updated - - -

makija said:
And it will work with sos nav pod housing ? If so i want one

It works with any display, including the one we sell that fits in to the nav pod (along with in dash nav units, etc).

makija · 21 December 2013

Ordered and chris at sos i wi be giving you a call sometime in january for aemems2 nav pod and screen purchase

))

OKI-BOY · 22 December 2013

I look forward to this very needed and practical modification in my NSX.
As I was telling Chris, gauges down near the ash tray area is not practical when tracking/racing/driving fast.
They need to be posted closer to eye level.
Displayed in the nav pod, I don't have to go too far off from the direction of travel/road.
I'm still toying with the gauge designer.
Hopefully a tutorial will be added soon.

ScienceofSpeed · 23 December 2013

Thank you for your feedback!

ScienceofSpeed · 27 December 2013

OKI-BOY said:
I'm still toying with the gauge designer.
Hopefully a tutorial will be added soon.

Thank you, a tutorial along with instructions has been posted here. A discussion forum is also available:

http://gaugeart.com/support/default.aspx

turbolence46 · 28 December 2013

Here are some examples of different layouts you could use. Ignore the voltage on that one pic.

makija · 28 December 2013

turbolence46 said:
Here are some examples of different layouts you could use. Ignore the voltage on that one pic.
View attachment 108626 View attachment 108627

Wow man that is neat i cant wait to get mine so i can play around and try it out ... Is it hard to make layouts ?

turbolence46 · 28 December 2013

yes and no, it depends how complex you make. Like on my second one where I actually put the AFR numbers in the background image, that takes a bit of tweaking. But the first one is automatic, all digital numbers; so its already accurate. The creator of the unit does a real good job updating the firmware to make it easier. I've had the unit for almost a half a year now, it's come a long way and it's very well built and programmed.

sca037 · 28 December 2013

Looks like a fantastic product!

How hard is it going to be to find a 7" monitor (or tablet PC?) that has a VGA or Composite inputs though?
(might this work? http://www.newegg.com/Product/Product.aspx?Item=9SIA2C00YR9740 )
I have a Honda Navpod on the dash already, so fitting it there should be a snap.

Brian

ScienceofSpeed · 28 December 2013

turbolence46 said:
Here are some examples of different layouts you could use. Ignore the voltage on that one pic.
View attachment 108626 View attachment 108627

Both great designs, thank you for posting! I'm not sure if you've seen it, gaugeDesigner has been updated with several new features, including left and right digital text alignment.

- - - Updated - - -

sca037 said:
Looks like a fantastic product!

How hard is it going to be to find a 7" monitor (or tablet PC?) that has a VGA or Composite inputs though?
(might this work? http://www.newegg.com/Product/Product.aspx?Item=9SIA2C00YR9740 )
I have a Honda Navpod on the dash already, so fitting it there should be a snap.

Brian

hi Brian --

Very easy. Good quality units can be found on Amazon for $100-200. Look for ones with a VGA input, 800x480 resolution, and 250 nit. I'm not sure if you are aware, we make a screen & machined plate that fits in to the nav pod:
http://scienceofspeed.com/products/interior_performance_products/NSX/ScienceofSpeed/LCD_display/

- - - Updated - - -

makija said:
Wow man that is neat i cant wait to get mine so i can play around and try it out ... Is it hard to make layouts ?

Check out this tutorial just posted which will help you get up and rolling designing custom gauges:
start here: http://gaugeart.com/support/kb/?p=157
tutorial: http://gaugeart.com/support/kb/?p=124

OKI-BOY · 31 December 2013

Gauge Art

Still toying with designer & photoshop, have to make some changes but here goes:

Once installed in car, I can upload data and post a video once complete.

jorligan · 1 January 2014

Next time, just call me. I have an extra you can try. High up, daytime visibility may be an issue unless you have a transflective screen.

OKI-BOY · 1 January 2014

jorligan said:
Next time, just call me. I have an extra you can try. High up, daytime visibility may be an issue unless you have a transflective screen.

Post design please.
I'm eager to see other designs.

OKI-BOY · 3 January 2014

gaugeART Designer forum is very easy to manage/submit info. I encourage you guys to make submissions.

makija · 4 January 2014

Awesome design man .... Wiah i was that good lol

OKI-BOY · 4 January 2014

makija said:
Awesome design man .... Wiah i was that good lol

I try. Really interested in designs from others.

- - - Updated - - -

Font styles can be changed in design for easier reading.

ScienceofSpeed · 11 January 2014

hi guys --

Just a reminder that the gaugeART Video Gauge Adapter is available for an introductory price with free shipping that expires end of this month! www.gaugeART.com

makija · 12 January 2014

ScienceofSpeed said:
hi guys --

Just a reminder that the gaugeART Video Gauge Adapter is available for an introductory price with free shipping that expires end of this month! www.gaugeART.com

Do you know when will they ship them out?

ScienceofSpeed · 14 January 2014

Orders will begin shipping in the next 4-5 business days.

HOT! gaugeART Video Gauge Adapter

Similar threads