well hello my fellow nsx owners.. i would like to start out with hub spacer! i'm currently thinking I should get some but I don't have a clue where to start . Currently I have 17 front 18 rear with 1.3 drop on the ride height . I wanted them to look more aggressive by sticking out a little more. I notice there where alot of space between the tires and the fenders.... what should i go for in the front and rear .. If you have any pictures please post it.
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
hub spacer help!!
- Thread starter kultureshawknsx
- Start date
you need to post more specs on your wheels, the spacers on other wheels will look different than yours.
I have 5mm spacers on my stock wheels and think it looks perfect. That is also my opinion.
I have 5mm spacers on my stock wheels and think it looks perfect. That is also my opinion.
my wheel spec are 17.8 front 18.9 rear.. 5mm hmmm interesting I was looking at 10mm in the front and 15mm rear i don't know if that going to work
what are your offsets already on the wheels you have. this is the most important part
Post a picture of the your wheel's mounting surface.
Post the width (I think you said 17x8 and 18x9) and offsets. :smile:
The offset is usually posted on the wheel on the back side of it (you'll need to remove the wheel). It'll be stamped on the back on either a spoke or the center hub portion of the wheel written like "+45" or "ET 45".
Last edited:
Yup. I don't know why you would want to push the wheels/tires out any more than that, unless you're going to enter your NSX in some "low rider" shows, LOL! :biggrin:
Similar threads
