Integra valve clearance?

Joined
2 February 2003
Messages
117
Location
Massachusetts
I want to do a valve adjustment on my Integra tomorrow, but can't find the valve gap specs. Anyone have any idea?
It's a '94 Integra RS (non-VTEC).
Thanks, SF:confused:
 
Every NSX owner has a service manual for a 1994 Integra at home, right? ;) Mine says, for the RS:

Intake: 0.08-0.12 mm (0.003-0.005 in)
Exhaust: 0.16-0.20 mm (0.006-0.008 in)
Measured when cold.

The procedure is on page 6-3. You should really have a service manual if you're going to be working on your car...

(Note - these are not the same as the specs for the GS-R, so if you have a GS-R, don't use them; the GS-R specs and procedure are on page 6-44.)

-------------------------
'91 NSX
'94 GS-R
'01 ITR
 
Thanks, you made my morning :D

This was kind of a last-minute project a mechanic friend of mine is helping with. He (hopefully) knows the procedure but the actual specs would be tough to find on a Sunday morning!

Thanks again.........--Scott
 
Back
Top