Need Help!!!

[mateo91181]

I have a 92 nsx and my wheels just came in. They are hp evo's with 18x8 in the front and 19x9.5 in the rear. Everyone I have ever talked to said that I would need a 3mm spacer for these to fit. I ordered 4 spacers from rp motorsports. Went to go put them on and the rears work fine. They almost look like they dont even need a spacer, but the fronts rub the bracket around the caliper on both sides. We measured the spacer and it looks to be the correct size. I am running a stock brake setup. I am thoroughly confused as to what the problem is. They look to be the correct offset. I dont even know if they have any other offsets in that size wheel. If anyone can shed some light on this I would really appreciate it. Thanks.

 

[NSX~PERT]

The spacer for the front should be 3mm. post some pics of the car

 

[CityofAngels]

How did this turn out for you? I'm looking to get the same rims from RP motors for my '92 and was wondering about the spacers.

Also, was it difficult to find tires for the 18/19 combo?

Love to hear your experiences with your new rims.

Thanks!

 

[L5-S1NSX]

Greetings:

I have the same set up only

HR 5mm spacers all the way around ..No Issues at all !!
also. hubcentric rings and tuner lugs....

front 215.35.18 18x8
rear 275.30.19 19.9.5

I have BFG KDW G Forge ,(new tread ) There awesome , great grip , not noisy
High performance...and...very sweeeet......

also. Comptech Sways / Comptech Springs and Koni

Very Happy with the Set up !! 91Red/blk .....Hope this helps !!

Happy Motoring:wink:

Ken
Seattle

 

[cellexco]

I had the exact same problem as you and the same yr NSX. Check out my thread here:

http://www.nsxprime.com/forums/showthread.php?t=68643

I went to 5mm spacers in the front, I kept the 3mm in the back and they are fine. It was the fronts I had an issue with and now they are awesome.

Good luck!
Moez.