-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
NEW! SCW Performance Composite Fiberglass Center Console - Double Din
- Thread starter NSX1145
- Start date
Can we get an update? Thought it was supposed to be shipped this week? Thanks
- Joined
- 13 December 2011
- Messages
- 1,934
Shipment tracking as follows, allow 24hrs to update:
Dalomba - 9461511899560954184463
Wai - 9405511899560954490674
Bauman - 9405511899560954114952
Brown - 9461511899560954645964
Thibodeaux - 9405511899560954585356
Der - 9405511899560954563446
Quesada - 9461511899560954714875
Vongkhamchanh - 9461511899560954528557
Tiet - 9405511899560954725592
Whaley - 9461511899560954604558
Dalomba - 9461511899560954184463
Wai - 9405511899560954490674
Bauman - 9405511899560954114952
Brown - 9461511899560954645964
Thibodeaux - 9405511899560954585356
Der - 9405511899560954563446
Quesada - 9461511899560954714875
Vongkhamchanh - 9461511899560954528557
Tiet - 9405511899560954725592
Whaley - 9461511899560954604558
Last edited:
Thanks for the update
Put me down for one. PM me the total shipped to my shop.
Thank you
Anthony
Thank you
Anthony
I likes! PM me the price for that shipped or just call me. I need it for my new NA1 I just picked up!
I hate to tease you guys but here is a quick phone pic for now... Full carbon fiber DD center console...
Price shipped please. Send me a PM
- Joined
- 13 December 2011
- Messages
- 1,934
They aren't made yet, I only have this one prototype for now. When I am ready I will post another thread in regards to carbon consoles.
- Joined
- 13 December 2011
- Messages
- 1,934
New! SCW Performance Carbon Fiber Center Console - Double Din
Hello guys,
Here it is, the prototype model - the NSX Carbon Fiber Double DIN Center Console
First off, this console is pre cut for Double DIN head units. It retains the OEM coin tray, and auto climate fan vent, as well as offers a near factory fitment. Additionally, these are a very thick, solid carbon fiber composite, not a bendy/wimpy console. Also worth mentioning, this console allows for the shift boot and coin tray to attach with OEM threaded screws, not glue / adhesive like some other brand consoles, which makes installation much easier. Each stereo is slightly different, so you will have to sand/trim appropriately for each install, but majority of the work is already done for you with this console.
These are not in full production yet, I am gauging the interest of this piece as ours is different than what some other vendors have to offer. These take significantly longer to produce and finish, given our schedule is pretty packed as it is already. I will probably have a few of these made unless there is a greater need for this item. I have the ability to make these in just about any carbon fiber weave type - Plain weave, Twill weave, Red Carbon, Kevlar, etc. at an additional cost (depending on material selected). Right now our FRP center consoles are 2-3 weeks delivery, expect this or longer for a full carbon version.
Anyways, here are some photos. Let me know your thoughts.
Hello guys,
Here it is, the prototype model - the NSX Carbon Fiber Double DIN Center Console
First off, this console is pre cut for Double DIN head units. It retains the OEM coin tray, and auto climate fan vent, as well as offers a near factory fitment. Additionally, these are a very thick, solid carbon fiber composite, not a bendy/wimpy console. Also worth mentioning, this console allows for the shift boot and coin tray to attach with OEM threaded screws, not glue / adhesive like some other brand consoles, which makes installation much easier. Each stereo is slightly different, so you will have to sand/trim appropriately for each install, but majority of the work is already done for you with this console.
These are not in full production yet, I am gauging the interest of this piece as ours is different than what some other vendors have to offer. These take significantly longer to produce and finish, given our schedule is pretty packed as it is already. I will probably have a few of these made unless there is a greater need for this item. I have the ability to make these in just about any carbon fiber weave type - Plain weave, Twill weave, Red Carbon, Kevlar, etc. at an additional cost (depending on material selected). Right now our FRP center consoles are 2-3 weeks delivery, expect this or longer for a full carbon version.
Anyways, here are some photos. Let me know your thoughts.
What is the price and guarantee fitment?
I'm thinking a console made from CF/Kevlar may look out of place if it's the only non-oem panel in the interior. Are there any plans to produce other interior parts using CF/Kevlar, etc.?
- Joined
- 13 December 2011
- Messages
- 1,934
No firm pricing yet, but they are made from the same mold we use on the Fiberglass consoles so the fitment is perfect. See our thread on fiberglass consoles for fitted pictures.
I thought all double dins had the same dimensions... why not mock it up with the scienceofspeed double din bracket so it fits for everybody?
Since there might not be any more sduff double din batches, I'd be interested depending on price...
Since there might not be any more sduff double din batches, I'd be interested depending on price...
This is a beautiful piece. Please pm me a price.
That's fine but I'd still like a price please
please pm me for the price
Do you have these console also with the standard cutouts for the OEM Bose headunit and without the ashtray?
Would like to have one to install my Zeitronix flush beneath the radio instead of on to of the ashtray.
