Screw that hold the wing

[rogers]

Hello fella Nsx owners

Quick question what's the exact description of the screw that holds down the wing on the nsx.

 

[Wheelman]

I thought they were bolts and locking nuts that hold the wing in place.

 

[rogers]

Really! ok what is the bolt size? I need to replace just one bolt.

 

[rbirling]

Really! ok what is the bolt size? I need to replace just one bolt.

That's going to be tough, since they're built into the wing. I suppose you can cut a hole and epoxy one in there. Why don't you take off one of the nuts and match it? That will definately get the right size.

 

[FuryNSX]

Please clarify your question. As rbirling notes, the bolt is secured into the wing. Nuts are screwed onto the threaded stud. Are you simply missing a capped nut? Or did one of the studs get damaged?

If you're just missing a nut, take one of the other ones to a car parts store. Most have a display for car nuts and bolts with a sizing gadget. Don't bother with a hardware store. Most of them don't stock metric sizes.

If you want to get the piece from Acura, it is a "Nut, Cap, 6MM", part number 90303-SB0-000. (Note, that might also be 90303-S80-000.)

Part #24 HERE.

 

[rogers]

thanks