- Joined
- 11 January 2006
- Messages
- 393
So after trying to do research on the best nsx-r spoiler for the money, i decided to pull the trigger and gamble on the seibon TR (nsx-r) style wing
I told myself i would do a full write up review for all other members thinking about this spoiler since i could find no info on it here on nsxprime
I was going to go with VIS, but VIS was actually $60 more than the seibon and VIS's customer service sucks
I was looking into downforce, but the best I could find for the CF version was like $1200 plus shipping.
My boy Cesar at Nor Cal auto styles in fremont Northern CA hooked it up once again. Lowest Price that i could find shipped was $490 on ebay, and he managed to beat that picked up locally at his shop. So if you are in the bay area and need carbon fiber products, no one can beat his prices, he actually drives down to Seibon and Vis and hand picks all the products to make sure no defects, i figure thats better than gambling on shipping via internet sites.
Their number is 510-360-9999 if anyone is interested in using them.
I just picked up my spoiler today after it had been back ordered for over 3 months at Seibon. Wing came with a build stamp of 4/12/2012
So here are the pics and fitment
actually has foam surround to act as a gasket, and notice the wiring is coming out of the correct side!
The spoiler took about 5 minutes to install, took very little adjusting and all bolts lined up good
Im not sure about how the downforce fits, but with the seibon being 1/3 of price, I do not see anything wrong with it.
I dropped off the wing at my body shop to get an extra clear coat put on while the finish is still new. Should protect from yellowing or fading by putting a high grade automotive clear on it.
I did notice the LED light seems to be fairly cheap. I took the led housing off which is held on by 3 screws and added silicone to where the wiring came out of the plastic (from the factory, its a huge hole where the wire comes out, water would prolly find its way in there)
I told myself i would do a full write up review for all other members thinking about this spoiler since i could find no info on it here on nsxprime
I was going to go with VIS, but VIS was actually $60 more than the seibon and VIS's customer service sucks
I was looking into downforce, but the best I could find for the CF version was like $1200 plus shipping.
My boy Cesar at Nor Cal auto styles in fremont Northern CA hooked it up once again. Lowest Price that i could find shipped was $490 on ebay, and he managed to beat that picked up locally at his shop. So if you are in the bay area and need carbon fiber products, no one can beat his prices, he actually drives down to Seibon and Vis and hand picks all the products to make sure no defects, i figure thats better than gambling on shipping via internet sites.
Their number is 510-360-9999 if anyone is interested in using them.
I just picked up my spoiler today after it had been back ordered for over 3 months at Seibon. Wing came with a build stamp of 4/12/2012
So here are the pics and fitment
actually has foam surround to act as a gasket, and notice the wiring is coming out of the correct side!
The spoiler took about 5 minutes to install, took very little adjusting and all bolts lined up good
Im not sure about how the downforce fits, but with the seibon being 1/3 of price, I do not see anything wrong with it.
I dropped off the wing at my body shop to get an extra clear coat put on while the finish is still new. Should protect from yellowing or fading by putting a high grade automotive clear on it.
I did notice the LED light seems to be fairly cheap. I took the led housing off which is held on by 3 screws and added silicone to where the wiring came out of the plastic (from the factory, its a huge hole where the wire comes out, water would prolly find its way in there)
Last edited: