Recent content by 96cxt

I went through this last week. Lucky I was able to borrow it from a local service shop. Thankful they were willing to help me out. Need to source one for my tool box as well.

Back from the dead. Thank you for the video. I broke the snap ring in my 92 a few weeks ago. I had already replaced the transmission about 8+ years ago with one that had all the JDM gears and typeR FD. I was able to source a new casing and so I'm not sure if this transmission also had the TypeR...

I have done few of these and the aftermarket ones are wider and you may need to use a longer bolt in the bracket that holds the dryer behind the front bumper.

So i finally finished up the turbo install and completed the intercooler. Hoping to get the tuning completed in the coming weeks. Im not looking to make more than 380 ish whp. These are small turbos and should have good low end power. Currently has a street tune before the intercooler was...

Hey David, It's been a long time!!! How are you liking your Carrera?

As long as it's only the wheels and not the whole car :tongue:

I have had it for years now. I got it used from another member. It worked out great for the BBSC supercharger kit I had, it helped keep things cool under the hood. Living in Houston, we see +90* days and you could still touch and hold the intake manifold after coming back from a long drive...

lol

1:18 to 1:1 :P

Update: The car is back together and I've put on about 120 miles on it just to ensure there are no leaks or any other issues. Here are pictures of the car after a wash and wax :)

The engine is back in the car, did a warm up cycle to ensure no oil or coolant leaks. Did a compression test before installing the motor back into the car. And a pic of the motor back in the car. Still have to flush and bleed the brake fluid, clutch line fluid, install the air box, and a...

Pm'ed you.

Finally all the parts came in. Replaced the following: Timing belt - The old one has less than 10k miles but was replace about 7 years ago. Cam seals (x4) Crank seal (oil pump side) Cam plugs Here is a tip for anyone that is going to tackle the timing belt on their own. Before removing the...

Hey JP! Hope you are doing well in the new world order :)