Recent content by KANE

Guys, if you need to get intouch, call my cell 206 229 7856 Pikko, email responded Jay, email responded Jeff, drop me a line if you have any issue Qieu, been awaiting your final list of needed parts. Thanks! Ravi

Cool man glad to hear it :)

Again incorrect, I said the collapsed thickness is 20 mm, I did not say it adds 20mm Please re read, my device places the spring at the identical location as the original kw spring perch. The underside of my piston, the the underside of the kw spring perch are in the exact same location...

My VRH kits are always a straight bolt on deal, and the vrh system is not air ride, you are not riding on air. The issue here is a damper set not designed or ever fit verified for a street car. Thanks Ravi

Black Perforated Ultrasuede perfect for retrimming door card sets $40 yd

NSX Hi Flow uni filter element (used) Washable $35 shipped http://www.umbrellaautodesign.com/product_info.php?product_id=2099

These are cool :) $25 shipped inside the USA http://www.umbrellaautodesign.com/product_info.php?product_id=2098 Original NSX car cleaning kits:

Hi guys, I'm still trying to clear out all the surplus nsx parts at my shop, there is a ton still left. Discounted prices :) ** Brand new** Sorcery CF rear hatch complete $1400+ shipping Keyless entry brains and remotes + original leather cases Power antennas 1992 complete intake manifold...

The underside of my canister piston places the spring at the exact same position as the underside of the original kw upper spring mount, it does not shift the spring farther downward on the damper. This is all calculated at the time of fabrication as is the length of the replacement spring, I...

My statement was to correct your assumption that the vrh canister takes up 3" It does not, in fact only 20 mm when collapsed. Ravi

Incorrect. the vrh canister is 20 mm total thickness when collapsed, spring fits inside canister. Also, for KW competition, the spring fits against a separate spring perch below the top hat, not up against the underside of the top hat. Ravi

The VRH canister places the spring at the exact same position as the original kw spring perch, This is not the issue, damper body length is the issue. These dampers were utilized on a race car and never verified to fit a street driven nsx, with oem placement of arms at mounts. Ravi

Hi guys, I'm attempting to clear out all the remaining used nsx parts inventory at my shop. Feel free to make offers and parts will be available at a discounted rate. There is way to much to list that I have collected over the last 15 years. If you could email, call or text with your parts...

Email replied

All pm replied Rav