For god sakes don't go and buy another complete transmission. Have the tranny taken to a reputable rebuild shop since it's out, it probably needs a ring and bearing kit and a health check / magnet cleaning.
Take the clutch case (the part of the transmission that the clutch fork attaches to) to...
Ran a 12.92 in my NSX. headers / exhaust / NSX-R gears and standard weight. 1991 with 90k miles. Sumitomo HTZ II's 400 tread wear street tyres. Consistently. Clutch at the time was OS Gilken twin disk.
I've steered away from off the shelf engine degreasers for a while. I noticed big time that a degreaser, especially on exposed aluminum will leave white haze and very ugly marks even on a cold engine. It might just be my personal experience though.
Generally I'll use a 1:4 ratio of simple green...
Rockauto.com
The only thing about this site is you can get really cheap parts that won't last, or you can get some pretty high dollar stuff. For example, when looking for brake rotors (stock replacement) the prices range form 20$ a rotor all the way up to Stop Tech drilled / slotted rotors...
Had this exact problem on my 91 at around 94k miles. Order a speed sensor form rock auto, but scroll down the list to get the better quality items. should run you about 120-150$ and it takes 15 minutes to replace. Easy! AIRTEX / WELLS Part # 5S4594
Good morning Prime!
Well... once you fix one thing something else always seems to pop up on older cars right?
Developed a misfire today while driving to work after driving completely fine yesterday. My first suspicion is water since it rained like it hasn't rained in a while during a massive...
Hmm I'll have to order a bottle of this and give it a shot. Thanks for the reply!
hahaha nothing wrong with that. I do like seeing some super clean OCD cars, but mine likes to be driven thousands of miles a year =)
Hmm well I haven't noticed any degradation of rubber lines under the hood of...
Hello prime!
Time to pick your brains again.
I have a good deal of knowledge regarding the regular detailing of the exterior/interior parts of any car, you know, wash with 3 buckets, treat the paint like you would your skin, foam washes / wax every 4-6 months etc. But what about the engine...
Bench bleeding the MC is a must like Larry pointed out.
I just installed the RL BBK and used the 25 dollar hand pump bleeder from harbor Freight. Worked like a charm and comes with a 100 ml cup that attaches to the vacuum lines. I bled RR - RF -LR- LF twice over and got a firm pedal.
To do a...
I purchased the seibon type-r hood in 2013 and actually noticed a 1/10 bar temp drop without the radiator duct (don't have it made yet). I have noticed not cooling issues with the hood as far as AC is concerned. Just took it on a 200 mile adventure this weekend with some autocross thrown in. AC...
I'm a little late tot he game but I went form the OS Gilken twin disk tot he EXEDY hyper single with the chromoly flywheel. the OS gilken was around 29 LBS or so and the EXEDY was a hair over 19 if I remember. And a good price. Revs were noticeably faster as well as throttle response.
The only...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.