Suspension Billstein HD's with custom ride height rings and Tanabe springs

[SlipAngle1979]

Ordered new from SOS - Billstein HD dampers with the 2-position perch, I also had a friend machine .5" rings that sit under the perch to further lower the car with the Tanabe springs with OEM 16/17 wheels. When I put the Tanabe's on, the low perch was not low enough for my taste, thus the rings were added. The machined rings slide right off so you can just run the dampers as they were out of the box if you like. I used the dampers, first with some 91-93 springs I found (which turned out to have settled), then with the Tanabe's. Used for 3 track weekends then moved up to KW V3's. Not much actual road use-maybe 5,000mi. on them. The Tanabe spring rates are similar to that of an NSX type-S. For less than the price of a new set of Billsteins you get spirngs, a 3rd lowering position, and not very used dampers. Sorry I don't have pictures from when they were on my car. PM if interested

$600 for everything - I'll work with you on shipping

I'm in the Midwest for local pickup

 

[SlipAngle1979]

Price reduced to $600 - Billstein HD's + Tanabe springs + plus custom removable .5" spacers for more lowering. A great upgrade to stock NSX's on worn out factory shocks and springs. Send me an email through prime with your email address or number since I am a "new" member.

 

[Andr3w]

Do you have a picture of them installed to show the height?

How much is it lowered compared to oem?

 

[SlipAngle1979]

Sorry I don't have pictures from back then. SALE PENDING.

 

[SlipAngle1979]

sold