• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Interest in a 100% Full Carbon Fiber Gauge Cluster Hood Cover for your NC1 NSX

Joined
15 October 2003
Messages
6,809
Location
West coast!
NSX owners,

We wanted to get your take on a new product that we have been doing R&D for the Type-S owners since apparently at some point in the build numbers, Acura decided to substitute the Carbon Fiber hood as shown below on our Type-S for an Alcantara model. Not sure the reasons why this was done but now suddenly Type-S owners who opted for the Lightweight package which should have gotten the CF hood is not getting them anymore.

We already have a list of of pre-orders for them but wanted to extend this offer to all NC1 owners.


Let us know if you would like to pick one up for your car and we can get you on the interest list.


See pics and reply here if interested or shoot us an email or DM us on Social Media!


Check out our 2nd gen products here:

https://euroboutique.us/collections/honda-acura-nsx-2nd-gen




Our Type-S luckily got the CF hood shown below:






Non-Carbon version:

 
Yikes! That gloss CF steering wheel looks terrible right next to the matte CF hood. Who would do that??!!

thank you so much for your feedback! Sorry that photo was merely for demo purposes, we will be swapping the Gloss wheel out for a MATTE cf wheel shortly, the picture was just to depict the OEM hood.

You bring up a good point, we offer all of our CF parts in your choice of Gloss or Matte since every owner has a preference. As you know most the OEM Acura exterior CF parts are gloss. There is no right or wrong answer.


When the OEM CF hood is finished customer's will the option to get in MATTE or Gloss. Also in many high end cars, it's common to find both gloss and matte finish parts in the same car. Take the Audi R8 for example. There is a CF part that actually changes from Gloss (around the radio) to MATTE as it reaches the steering column to reduce glare.


thanks again for all the interest and feedback, much appreciated since these parts are all small volume pieces made for a NSX owners!
 
What is the price for this prodcut?
 
What is the price for this prodcut?

The product is in R&D right now and we have not determined a MSRP yet. However we have a pre-order interest list and have about 20 people on the list for the product already.

This will be a full carbon fiber replacement just like the factory piece. Unlike the factory piece we will offer this piece in BOTH Matte CF or Gloss CF by owner's choice to match the car since the OEM Engine bay is Gloss, Roof is Gloss, etc.

If you want to get on the list please shoot a PM.


thanks
EB staff
 
The product is in R&D right now and we have not determined a MSRP yet. However we have a pre-order interest list and have about 20 people on the list for the product already.

This will be a full carbon fiber replacement just like the factory piece. Unlike the factory piece we will offer this piece in BOTH Matte CF or Gloss CF by owner's choice to match the car since the OEM Engine bay is Gloss, Roof is Gloss, etc.

If you want to get on the list please shoot a PM.


thanks
EB staff

I cannot PM you but I’ll be interested in one.
 
For those who are interested, please shoot us an email or PM us. We have a list going for people who are willing to commit now with an introductory price of $1049

We only need a $500 deposit at this time with the balance due when items are ready to ship.


thanks for all the interest and support!
 
TGIF fellas, if you wish to get a deposit in and on the list for this item please email us ([email protected]) with your mode year and number (if Type-S) so we can get you the quote. We will need your email to send you the quote.


For those not familiar with our products please see this link of the NC1 Interior handles installation:



(all of our parts are high quality pre-preg carbon fiber, extremely strong and very precisely made)


This is the 2020 NSXPO Virtual video we created so it shows some of our products, obviously we have many more products since that video was created but you can see what we do here:




thanks!
EB staff
 
Just got back from NSXPO in Arizona and wanted to give an update on this project as we had a lot of Type-S and NC1 owners asking about this part. Currently it's in R&D and we have a list of all pre-paid orders.

Stay tuned as we update with photos but this will be a direct swap full carbon fiber piece finished in MATTE carbon fiber. Gloss is available but we don't advise due to sun glare.


PM us to get on the list if interested.


thanks again

EB staff

www.euroboutique.us



Some random pics from NSXPO of our car showing off the new CF side skirts and CF interior trims!




 
UPDATE: 10/31/22 - Happy Halloween!


This part is currently in R&D and we anticipate having this ready by end of the year or early January. Please be patient as every product we sell for this car is carefully made using the highest quality materials and we do a lot of testing on actual cars.

For those who have our products you know we make high quality products that we would use on our own cars first to ensure perfect quality for you.


Our carbon fiber Type-S inspired side skirts are in production now so if you want to pick up a set (NO DRILLING, uses OEM attachment points) this product is ready to be ordered on our website here:



The OEM Gauge Cluster hood once it's released will be on our website as well so thanks for the patience!

EB staff
 
UPDATE: THANK you to all the pre-orders for this item - we should have the prototype tested and ready to ship by January, 2023 so if you already ordered thanks!

Questions let us know via PM.


thanks again!


Follow us on Instagram:

https://www.instagram.com/euroboutique/


We also have a Youtube channel with a lot of NSX DIY content, link is in the Instagram link above!

YOUTUBE: http://www.youtube.com/c/EuroBoutiqu...berMotorsports


To purchase, here's our website:

www.euroboutique.us


thanks always for your support!
 
Please watch this video, we have this product ready now so any questions shoot us a PM.

We took the OEM design and improved it so not only does the part look better, but it is also lighter and stronger being a full carbon 1-piece design.

Watch video here:



Latest pictures here:







 
UPDATE 12/25/22:

We have a few in stock , ZERO WAIT!

We've had a few owners install and waiting for photos but here's a sneak peek at how it looks now with the full carbon version, you no longer see the plastic underneath!






Questions let us know via PM.


thanks again!


Follow us on Instagram:

https://www.instagram.com/euroboutique/


We also have a Youtube channel with a lot of NSX DIY content, link is in the Instagram link above!

YOUTUBE: http://www.youtube.com/c/EuroBoutiqu...berMotorsports


To purchase, here's our website:

www.euroboutique.us
 
I have a question

Why don't you use the classified area?

I have never seen another auto forum where a vendor spammed the shit out of discussion area like you do
Apologies, initially this thread was meant as a "feeler" to see if we should build this product and get owner input.

We will ask for this thread to be moved since do not have Admin rights to move threads
 
Guys we have this item in stock right now ready to ship!

On sale for a $150 off - limited quantities in stock - sale ends March 31st.

PM us and we can ship same day.



thanks!

Questions let us know via PM.


thanks again!


Follow us on Instagram:

https://www.instagram.com/euroboutique/


We also have a Youtube channel with a lot of NSX DIY content, link is in the Instagram link above!

YOUTUBE: http://www.youtube.com/c/EuroBoutiqu...berMotorsports


To purchase, here's our website:

www.euroboutique.us
 
A few of you have asked if this is available in gloss to match our other trims and the answer is YES!

(remember the OEM part is not full carbon fiber, ours is 100% made in one piece instead of 2 parts)






thanks!
 
Black Friday 2023

Ok fellas, this is our once a year sale that you have been waiting for - we are offering 10% off most items under EuroBoutique in our NSX collection for the 1st and 2nd gen cars.

This sale is our big once a year annual sale so if you have been on the fence on getting parts for your NSX, now is the best time ever to get in on this sale. We have some inventory left from NSXPO so hurry if you want to get something with little to no lead time.

(keep in mind there is no guarantee we have inventory and will be happy to build any parts you want as the parts do not have to be in stock for this sale). HOWEVER the sale positively ENDS on 11/25/23, midnight PST!

Use this link from our website to get the deal or you can email us for a customized quote if you prefer.

https://euroboutique.us/discount/2023BFSale


thanks again for your support in 2023!

EB staff
 
For those who wish to purchase one or have questions on how to install this part, let us know, we usually install this part while doing the large 2-piece dash trim. This part can be replaced easily with minimal disassembly.

PM us for questions if you have purchased the part and need technical support.



thanks again
eB staff


Questions let us know via PM.


thanks again!


Follow us on Instagram:

https://www.instagram.com/euroboutique/


We also have a Youtube channel with a lot of NSX DIY content, link is in the Instagram link above!

YOUTUBE: http://www.youtube.com/c/EuroBoutiqu...berMotorsports


To purchase, here's our website:

www.euroboutique.us
 
This upgrade is as must! I can confidently endorse it due to its improved superior one piece design and enhancement compared to the factory option.

In my opinion, more individuals would likely consider purchasing this product if it included installation instructions. Providing clear guidance on the installation process would empower users to easily install the parts themselves, making it more appealing to a wider audience and sales.
 
This upgrade is as must! I can confidently endorse it due to its improved superior one piece design and enhancement compared to the factory option.

In my opinion, more individuals would likely consider purchasing this product if it included installation instructions. Providing clear guidance on the installation process would empower users to easily install the parts themselves, making it more appealing to a wider audience and sales.

thanks for the kind words, we do offer a detailed video here (we updated this one) with new photos and even have screen shots from the Acura manual to help guide you through the process.

See video here:



TGIF!

EB staff

www.euroboutique.us
 
PM's replied - for local owners we offer full installation of pretty much every part for the 2nd generation NSX!

Let us know if you have questions!


Visit our website or PM us for delivery dates, we have many items in stock!




Honda/Acura NSX (2nd Gen)

Subscribe to our YouTube at: https://www.youtube.com/c/EuroBoutiqueCarbonFiberMotorsports/videos

www.euroboutique.us


NEW PRODUCTS:

a) 2-piece steering column trim
b) Lower Gauge surround switch panel
c) CF exterior side mirror caps
d) CF hood Vents
e) CF Trunk Interior Trim Garnish (optional billet replacement screw caps!)





Full carbon fiber interior looks so sexy!

 
Back
Top