Name that part

[ok2k]

Can anyone tell me what part I'm missing below along w/ a part #?

 

[ofdlt10]

r/s pillar garnish. here's the number for a 1994:

84201-SL0-A01ZE GARNISH, R. SIDE *YR167L*
( LIGHT TAN ) 001 1994 NSX 152.75

plastic cap on the end is part of the assembly.

hope this helps.

 

[ok2k]

r/s pillar garnish. here's the number for a 1994:

84201-SL0-A01ZE GARNISH, R. SIDE *YR167L*
( LIGHT TAN ) 001 1994 NSX 152.75

plastic cap on the end is part of the assembly.

hope this helps.

Gracias! That looks like it on the parts diagram.

It looks like that's for light tan, though, and I'm looking for Ivory.

 

[Larry Bastanza]

84201-SL0-A01ZB GARNISH, R. SIDE *NH208L*
( PLATINUM WHITE )

This is the white, it is for 02-05. But, this is what is listed for the 1991 also. I think it is different, and I really do not think you can get the original ivory anymore. What year?

Go here, item #13:

http://www.acuraautomotiveparts.org...omp=List All&vinnoT=&trim=&trans=&view=normal

HTH,
LarryB

 

[ok2k]

Thanks, Larry - you help with all things large and small.

It's a 91 (black/ivory) - I was afraid it might not be possible to get the ivory anymore...

 

[NSX-ey]

If you get black on both sides it might blend.

 

[95bandit]

I would like to replace just the end caps on both sides, does anyone make a CF piece or really just any way to get just the end cap?

 

[brettowen]

Thanks, Larry - you help with all things large and small.

It's a 91 (black/ivory) - I was afraid it might not be possible to get the ivory anymore...

I need the exact same part in black. The plastic tabs broke off on mine so the end cap just sits there secured by nothing more than gravity. I would have figured the driver side would have gone first. Stupid careless passengers! Yeah...I think ivory is no longer available. IMHO CF would look odd unless you plan on doing a bunch more CF interior trim pieces. Just get a black/tan one and paint it.

 

[Stephen@NCAutoUSA]

You mean like this?

http://www.nsxprime.com/forum/showt...ster-end-caps?highlight=Carbon+fiber+end+caps

The end caps are secured by the 2x extended tabs of the oem bolster.

I also have some oem black end caps that aren't perfect but they are better then nothing at all.

I do not have the bolster the end caps secure to though. Or at least right now. I am waiting for a set to be shipped back to me.

 

[95bandit]

Sduff@Composites: Prices please.