• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

OE Part Numbers For Complete 2002+ Exterior Refresh

Joined
17 September 2012
Messages
36
Location
SoCal
Hello Everyone,

I realize the 02+ conversion topic has been beat to death with multiple threads, especially regarding the front end face lift. However, after doing a search I didn't see too much in regards to actual OE part numbers for other external pieces. My biggest concern is, if let's say I order the rear tail lights or side skirts, if I'm missing any seals or additional hardware. I'm relatively new to the NSX, so I'm eager and appreciative of any feedback. Thank you in advance guys!

*NOTE* I understand I've left out the hood, but I plan to go with an aftermarket type R style.

02+ Front End Conversion (necessary pieces)
(1) 04711-SL0-A91ZZ FACE, FR. BUMPER 1
(3) 71106-SL0-000ZZ CAP, R. FR. BUMPER 1
(4) 71107-SLO-010YG COVER, FR. 1
(5) 71110-SL0-010 SPOILER, FR. AIR 1
(6) 71111-SL0-000ZZ SKIRT. FR. BUMPER 1
(7) 71120-SL0-010 STAY, R. FR. BUMPER BEAM 1
(8) 71125-SL0-010 STAY, L. FR. BUMPER BEAM 1
(9) 71126-SL0-000ZZ CAP, L. FR. BUMPER (UPPER) 1
(11) 71140-SL0-010 FRAME, FR. (UPPER) 1
(14) 71151-SL0-010 PLATE, FR. (UPPER) 1
(15) 71152-SL0-020 SEAL, FR. 1
(19) 71162-SL0-010 SEAL ASSY., R. HEADLIGHT 1
(22) 71167-SL0-010 SEAL ASSY., L. HEADLIGHT 1
(24) 71170-SL0-020 ABSORBER, FR. BUMPER 1
(36) 90111-SM4-003 BOLT, BUMPER 10
(41) 90305-SH3-000 NUT, AIR SPOILER CLIP 4
(44) 91503-SZ3-003 CLIP A, BUMPER 3
(45) 91577-SR2-003 CLIP, TRUNK LID GARNISH 2

(1) 33101-SL0-A04 HEADLIGHT UNIT, R. (HID) 1
(2) 33107-S0A-J01 SCREW (4X12) 2
(3) 33108-S0A-J01 SCREW (6X18) 14
(5) 33115-S84-A11 BULB (HB3) (12V 60W) 2
(6) 33116-SLO-003 BULB (D2S) 2
(7) 33119-S6M-003 CONTROL UNIT 2
(8) 33123-SL0-A01 BRACKET, R (1) 1
(9) 33124-SLO-A01 BRACKET (2) 2
(10) 33126-SL0-A01 COVER, RUBBER 2
(11) 33127-SL0-A01 COVER (1) 2
(12) 33129-S5A-J01 IGITER, HID 2
(13) 33145-SL0-A01 GASKET, SEAL (1) 2
(14) 33146-SLO-A01 GASKET, SEAL (2) 2
(15) 33151-SL0-A04 HEADLIGHT UNIT, L. (HID) 2
(16) 33173-SL0-A01 BRACKET, L (1) 1
(17) 33304-S5A-003 SOCKET (T10) 2
(18) 33305-SH3-AO1 SOCKET 2
(26) 93406-08020-05 BOLT-WASHER (8X20) 8

02+ Tail light
33501-SL0-A03 LAMP UNIT, R.
33551-SL0-A03 LAMP UNIT, L.

02+ Side skirt & Door Panel
71805-SL0-000 SEAL, R. SIDE SILL GARNISH (UPPER)
71806-SL0-000 SEAL, L. SIDE SILL GARNISH (UPPER)
75332-SL0-000ZZ GARNISH ASSY., L. DOOR (LOWER)
75312-SL0-000ZZ GARNISH ASSY., R. DOOR (LOWER)

02+ Rear Valance
71511-SL0-000ZZ SKIRT, RR. BUMPER

If there are any additional pieces that I will or won't need, I'll edit this original post so that it'll be easy for future reference. Thank you again!
 
Don't forget the brackets to reinforce the 02+ rear valence to the underbody:
64412-SL0-010 x 1: Stay, R side
64812-SL0-010 Stay, L side


91505-SL0-003 x 2: Clip NOTE: Unsure of exact quantity required for these clips.
 
Last edited:
Back
Top