Passenger Front Hub / Knuckle Bare Assembly w/ Ball Joints *Pic Inside*
I have a used passenger side front aluminum knuckle / hub housing assembly. It is a bare assembly including both ball joints. The Lower ball joint which is removed from the assembly has a small amount of free play, therefore the whole assembly was replaced.
Upper ball joint is interchangeable, still good, the lower ball joint can possibly be rebuilt. The knuckle also have a slight bend on the tie rod mount. It can possible be bent back or use the way it is. I had no issues with that problem, only the lower joint was giving me issues.
asking $250 picked up or
$275 shipped to the 48 continental states. (international, HI, AK please contact)
I have a used passenger side front aluminum knuckle / hub housing assembly. It is a bare assembly including both ball joints. The Lower ball joint which is removed from the assembly has a small amount of free play, therefore the whole assembly was replaced.
Upper ball joint is interchangeable, still good, the lower ball joint can possibly be rebuilt. The knuckle also have a slight bend on the tie rod mount. It can possible be bent back or use the way it is. I had no issues with that problem, only the lower joint was giving me issues.
asking $250 picked up or
$275 shipped to the 48 continental states. (international, HI, AK please contact)
Last edited:
