does anyone here know how to unbolt the middle section of the rear taillights?
also the rear hatch struts that hold up the engine cover?
thanks..
also the rear hatch struts that hold up the engine cover?
thanks..
-
***Text Box Error UPDATE*** Folks- we were able to fix the underlying issue with the missing text box on the forum. Everything should be back to normal. - Honcho
taking taillights apart?
- Thread starter nsx300
- Start date
For the Center "light" section (there's no light in there actually) remove the trim inside the trunk on the rear wall by unfastening the Philips screws; then you will be able to access the 4 nuts that hold the light section in place.
For the struts, just unbolt them using the hex heads - don't try to remove the ball joints from the struts, but take them out in one assembly.
You might consult the online manual http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf for this & other questions you might have.
For the struts, just unbolt them using the hex heads - don't try to remove the ball joints from the struts, but take them out in one assembly.
You might consult the online manual http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf for this & other questions you might have.
Attachments
thanks for the quick response D'Ecosse
Similar threads
