TURBO: NEW HP Performance Turbo Kit with Ceramic Coating, GT35R, AEM Stand-Alone, Air/Water I.C. - SOLD

[Free Range Racing]

TURBO: NEW HP Performance Turbo Kit with Ceramic Coating, GT35R, AEM Stand-Alone, Air/Water I.C. - SOLD

TURBO: NEW HP Performance Turbo Kit with Ceramic Coating, GT35R, AEM Stand-Alone, Air/Water I.C.

This is a never touched, brand new HP Performance Turbo Kit, complete! It has many of the available upgrades. This is a well-documented kit capable of making a lot of hp on the stock motor. This kit was built near the end of production, and the fitment issues that were reported with some earlier kits had been resolved by the time this one was built.

Here is a link to the original kit for sale:

http://newmexicosolarandwind.com/91-04 Acura NSX.htm

I have done a detailed inventory against that list. The kit is absolutely complete down to the hose clamps and wiring connectors! These were the options selected with this kit:

UPGRADES:

Garret GT35R Turbo, new in box and sealed. $750 upgrade. No compressor housing
AEM UEGO Controller, new in box $380 upgrade

NOT INCLUDED:

Turbo-Back Exhaust
RC Engineering 750cc Injectors
Denne Bell Boost A Pump
Blow-off valve exhaust tube

This price is very generous for a kit that cost $9000 when it was purchased six years ago. The build just never happened, and it's time for this beauty to end up on a running car instead of sitting in a box at the shop!

FREE SHIPPING ANYWHERE IN THE USA!

Feel free to contact me for questions: Erik @ Free Range, (503) 734-7245

Here is the complete inventory list if you can't/don't want to follow the link:

TUBING COMPONENTS

One (1) pair 1.75" tuned length custom turbo headers
One (1) turbo header crossover pipe w/wastegate flange
One (1) crossover to header tube
One (1) turbo downpipe
One (1) turbo to intercooler tube
One (1) intercooler to intake tube
One (1) blow off valve exhaust tube
All tubing is 14 ga. Mild steel, mandrel bent, tig welded
Jet Hot polished ceramic coating on all tubing

TURBOCHARGER

One (1) Garrett 60mm Turbocharger
One (1) Garrett GT-35R Turbocharger (upgrade)
One (1) Garrett 67mm Turbocharger (upgrade)
Jet Hot polished ceramic coating on all turbo exhaust housings
One (1) R40-05PSANG20-B Turbo Filter

WASTEGATE

One (1) Tial 44mm Wastegate

BLOW OFF VALVE

One (1) Billet aluminum blow off valve
One (1) 50mm Tial (upgrade)

Fuel SYSTEM COMPONENTS

Six (6) RC engineering 750cc injectors
One (1) Injector Connector
One (1) Kenne Bell Boost A Pump
One (1) AEM Engine Management System*
One (1) AEM UEGO Controller (upgrade)

INTERCOOLER AND COMPONENTS

One (1) Custom-built aluminum NSX Air/Water Intercooler
One (1) Stacked Plate Heat Exchanger w/fan
One (1) Bosch Water Pump
One (1) Water pump mounting clamp
One (1) Heat Exchanger Reservoir
One (1) Reservoir Mounting Bracket
One (1) 30 amp relay
One (1) 10' 12ga wire red
One (1) 5' 12ga wire black
Four (4) blue crimp connectors
Four (4) blue female spade connectors
Three (3) blue ring terminals

HOSES AND FITTINGS

One (1) Steel braided oil line 42"
One (1) Pushlock oil return line 5/8"X30"
One (1) 7/32" vacuum line 12'
Two (2) Pushlock 12" NPT x 34" hose fittings
Two (2) Pushlock 3/8" NPT x 5/8" hose fittings
One (1) -4 X Inverted Flare (GT-35 Only)
One (1) 1/8" female X -4 AN male fitting
One (1) 1/8" female X -4 AN male 90 degree fitting
One (1) 1/8" T Fitting, male off center
One (1) 1/8" x 14" adapter bushing
One (1) 1/2" oil drain flange
One (1) GT-35 Oil Drain Flange (GT-35 Only)
Two (2) 14" Vacuum T fittings
Four (4) Zip ties
One (1) 10 ' x 34" water line
Two (2) -8 Female x 34" Barb fittings
One (1) -8 Bulkhead fitting

SILICONE COUPLINGS

Two (2) 2.5" couplings
One (1) 3" coupling
One (1) 3.5" x 4" reducer coupling
One (1) 3.5" coupling
One (1) 1" coupling

CLAMPS

Two (2) exhaust housing clamps
Six (6) 1" stainless steel worm clamps
Six (6) 2.5" stainless steel T-bolt clamps
Three (3) 3" stainless steel T-bolt clamps
Three (3) 3.5" stainless steel T-bolt clamps
Two (2) 4" stainless steel T-bolt clamps
Two (2) 2.5" stainless steel V-band clamps

HARDWARE

Eighteen (18) 8mm 1.25 x 25mm bolts
Two (2) 8mm 1.25 x 10mm bolts
Eighteen (18) 5/16" lock washers
Eight (8) 3/8" lock washers
Six (6) 3/8" with 7/16 head bolts
Six (6) 5/16" x 12" bolts
Four (4) self-drilling screws


List Date: 8/2/2014

For more info, click here to view the original listing: TURBO: NEW HP Performance Turbo Kit with Ceramic Coating, GT35R, AEM Stand-Alone, Air/Water I.C.
--------------------------------------
SOLD


--------------------------------------

 

[Free Range Racing]

Bumping up after months away. Don't understand the Panjo pricing change - price is $7400 firm with free shipping to your door. Email [email protected] with any questions.