- Joined
- 28 November 2009
- Messages
- 997
Basically you may have seen me asking questions about turbo setups.
This is because i have purchased a turbo kit.
I'm not sure about some of the wiring, some of the plumbing and some of the fittings and best practices.
I would like to add, although my questions may sound amateur, it is being installed by a mechanic with my assistance IE. Tea boy... I am paying for his time and as cars vary so much and there are good and better ways of doing things i want to make sure i know all the answers to any questions the mechanic may have.
We start the install tonight, Please help...
Vacuums:
http://www.nsxprime.com/forum/showthread.php/181750-Vacuum-lines-i-need-3-i-believe
Oil Cooler relocation:
http://www.nsxprime.com/forum/showthread.php/181193-Sos-oil-cooler-relocation
Other Questions:
If anyone has a FIC base map for ID 720cc injectors but the supplier said a RC 750cc base map will be fine, would really help me out. But can i drive the car 100 miles to the tuners on this base map if i drove carefully?
Thanks.......
This is because i have purchased a turbo kit.
I'm not sure about some of the wiring, some of the plumbing and some of the fittings and best practices.
I would like to add, although my questions may sound amateur, it is being installed by a mechanic with my assistance IE. Tea boy... I am paying for his time and as cars vary so much and there are good and better ways of doing things i want to make sure i know all the answers to any questions the mechanic may have.
We start the install tonight, Please help...
Vacuums:
http://www.nsxprime.com/forum/showthread.php/181750-Vacuum-lines-i-need-3-i-believe
Oil Cooler relocation:
http://www.nsxprime.com/forum/showthread.php/181193-Sos-oil-cooler-relocation
Other Questions:
- Oil restrictor - Does this fit to the turbo itself? with the restricted side in the turbo? (Small hole) Then the braided oil line connects to that?
- AEM Truboost - Gauge and Solenoid wiring. What size spring to install in waste gate?
- Uego Gauge - Recommended hook up for wiring
- General Gauges - Recommended hook up for wiring
- AEM Water injection - Recommended hook up for wiring.
- Boost settings - when briefing the tuner do you specify BHP goals or boost pressure? Also i want to limit stress on my engine so i was thinking running about 320whp on a low boost setting so i can drive around with limited stress on the motor and still have fun but would this cause the waste gate to constantly open? and then the high boost setting at 400whp for when i need the extra power, i was thinking of setting the AEM water injection to kick in when on high boost setting and not the low boost. Is this a good idea? or is there a better way of doing it?
If anyone has a FIC base map for ID 720cc injectors but the supplier said a RC 750cc base map will be fine, would really help me out. But can i drive the car 100 miles to the tuners on this base map if i drove carefully?
Thanks.......
Last edited: