Search results

warmup on the ring i cant give throttle on start/finish line due to that i got warning for to high db :/ , and i forget to set the mic for outdoor filming so sounds is not super tho. http://www.youtube.com/watch?v=AS9rf_mQYtA

well former owner made that heat ex on hood, works great but the finnish is not perfect, but im gonna have it there until i change the hood cuz the funktion is superb. but for next season there will be a seibon vented hood instead.

good to hear some1 more then me likes them //M

...

hard to think that 2 of the pics is over 100 mph when photo is shoot, and 1 is 70 mph anyway all works great,buffle plate , and the accusump that never kicked in that feels nice //M

hi, if you apply the 2 comp glue right and use a working flocking device,then it should not fall off at all,if you dont scratch or risp the surface tho. //M

here is my result, i also have a flocking machine so i decide to flock it black cuz its hard to mix so i get that gray/black colour that we have on our dash, and we have some black in the interior aswell,im sorry for the poor quality on the pics, and yes i know i have only mounted 1 seat so far...

its the smallest size in 18" that toyo r888 and yokohama A048 is made in , if there was a 225/35-18 or 215 /35-18 i would buy it direct ,i use my car on track and street and i dont want to spend money on extra setup rims/tires ;) and it dosent looks so bad :)

yes it seems like that, i was just reading that thread, but it dosent matter for now i dont use the tcs on track driving anyway the tcs is to slow i go faster without it, but i wanted to know what was wrong and now i have, ty you prime ppl for all good answers //M

265/30/19 rear 225/40/18 front

yes, b4 i lowered i had bilstein lowered spring on, i run the car with 17/18" combo and 18/19" combo with street tires, now i have 18/19" combos with r compound, im new to hondas/nsx, have allways drive nissan b4 , but i think i read something about a diagnos test with jumping some connection...

hi,i have just put on coilovers and lower the car a bit more ,b4 this coilovers i "had bilstein with lowering springs" with bilstein the tcs was NOT flashing when i give some throttle, but with my new coilovers and have been lowering it a bit more then b4 now when i test the car the tcs will...

hi, i have search most of the threads about this but most threads are old, so maybe there is more options this days so if i wanna buy an aftermarket center console where is best place, i think oem is to expensive , is dali racings consoles good this days or is it still like i have read in...

then my comptech compressor is in the way , well im gonna look a little closer in this week,

PnP is plug and play, yes i was looking on that series 2 but i dont see that thay have it in PnP, or no notes if i can use the 30-1042 harness for the series 2 ecu, cuz if im gonna install a standalone ecu and do my own harness then i will go with haltech ps2000 instead. ok it use wasted spark...

hi there, i wanna ask you ppl that runs aem ecu AEM Part# 30-1042 pnp in honda nsx 91-95 modell in notes aem have only 5 dedicated out for coils we need 6 in nsx can you assign an dpo/dso/gpo to be assign for the 6th coil so i can go full sequential direkt fire, or do you have to go wasted...

hejsan har du ngn länk till ragges fälg tillverkare, och vad skall du ha för bakhjusen isf jag har spanat lite på led lyktorna med //M

nice indeed, 2bad thay only are left in bronze :/

hi there ppl, first i would like to say im a new member in this forum,im from sweden so my english can be bad sometimes "but still better then your swedish" and i hope i can find loads of good info about nsx in here. hope you can help me out here now, im going to change my rims, i realy like...