Search results

I bought these from another NSX'r years ago. They are 16" rear wheels that have been bored out to 70.1mm so they can be used as front wheel. I never mounted them to the front so I cannot confirm the fitment, but I was able to confirm that it was bored out to at least 70mm (I could not get my...

These are coming out of a transmission that failed. The transmission was opened up and inspected by Shad and his crew up at Driving Ambition. Pretty much the only salvagable piece of any value was the short gear stack (other misc. small parts may be salvagable). The catch is that the buyer...

Brand new, in original packaging. $50 shipped. Item shifted to ebay. See item# 270726900361. $40 shipped.

5-speed shift boot. I added a toggle switch which could be used for anything. I used it as a nitrous arm switch. Comes with boot and switch as pictured. $50 shipped. Prefer paypal payment.

EPROM only for a 91-94(?). You'll need to have your ECU modified to get your oem chip out for replacement. I recommend a ZIF socket. Label on EPROM says: NSX CHIP MODEL A CHECKSUM 25E6AD $100 shipped (US only).

This came off my 91 which has been sold. Comes with what is pictured. The elbow can be polished up and the silicone hoses can be cleaned up with Simple Green. $35 shipped (US only)

Bought new years ago, never installed. Comes complete with mask (for earlier models with pop-up headlights), storage bag, little red plastic things, fender well hardware and instructions. $110 shipped.

They are used and have little smudge marks here and there. The bindings on both books are starting to come apart from sitting open in the hot garage. It should be an easy fix with some binding glue but I'll leave that for somebody who knows what they are doing. $50 shipped obo.

I have an OEM car cover for sale with the storage bag. Also included is a cable w/ lock. I have only used the cover twice (while the car was sitting in the garage, never outdoors) so it is still pretty much new. It is a little wrinkled from being in the bag but otherwise it is in perfect...

1991 NSX Black/Ivory 50k miles JH4NA1150MT001235 salvaged YEAR & MODEL (NSX or NSX-T): NSX FULL VIN #: JH4NA1150MT001235 CURRENT MILEAGE: 50,107mi COLOR (EXT/INT): Black/Ivory TRANSMISSION: 5MT LOCATION OF VEHICLE (CITY/STATE): Folsom, CA CONTACT VIA (E-mail, PM, phone number, etc.)...

Hi all, looking for some good advice on what my options are when trying to dump some depreciating rental properties. I have received all kinds of differing advice. I'll try to sum up the situation quickly. Have two rental properties (in the Sacramento area) that are on a pick-a-pay loan w/...

I recently installed a ZEX 75shot dry setup in my 91. I did a quick search to get an idea what kind of trap speeds others have been getting w/ a similar setup but didn't come up with anything solid. My best of four passes (none of which were on a full bottle) has been 112.646mph. My ET's were...

hey all, i'm heading out to the dragstrip today to give my new zex setup a try. i have been doing some reading of some older threads and i gathered that retarding the timing may not be necessary until you are going with larger shots. i'm running a dry system that currently has the 55hp jet...

For those of you running a ZEX kit in your cars with a Zublin rpm switch, I have a quick question. Would you run the rpm switch in series with the arm switch? If so, then the ZEX module wouldn't power up until the arm switch is closed AND you are within the specified rpm range. Is there a...

i'm gathering the last couple parts for my nitrous install and need to come up with a fuel pressure safety switch. anybody know the make and model of a good option? i tried searching a few times but came up empty. is there another name for this safety device. -paul

looking for some input on an issue i have been dealing with for a little while now. i have a 5sp tranny with ct r&p and shortgears installed (w/ ct pg2 clutch). i have began to noticed a whining sound coming from the transmission while cruising in 5th gear at lower speeds, but this sounds only...

a/c not turning on FIXED!! when entering a parking lot earlier this week, the front end tapped the ground a little bit. i started hearing a slight clicking sound up front almost as if one of the condensor fans was tapping something. later that day when i turned on my a/c it didn't blow cold...

located in sacramento, ca. do not want to deal with the shipping hassle so local pickup only. comes with heatshields but no 02 sensors. please email with questions. thanks!! --paul

I installed a DC Sports header and Taitec GT Lightweight exhaust on my '91 and visited the local dragstrip tonight to test the new mods. Much to my dismay, the car was actually slower than it was before. My previous best was 13.0x @ 107 with the stock H/E. My best run with the new parts was...

yanked off the car a couple weeks ago. muffler looked fine, may be a couple scratches on the bottom from removal. exhaust = $50 both manifolds = $50 (w/o O2 sensors but includes heat shields) strongly prefer local pickup (sacramento, ca) prices are very negotiable. --paul;)

Gentlemen, I am in the middle of a DC Sports header install in my '91. Everything was going smooth according to the DIY info in the FAQ ... until this. I am having issues getting the rear manifold to line up on the head. It seems that one of the runners is hitting the crossmember directly...

I'm looking for a pair of rear 16" oem ('91?) rims so I can run drag radials on them. I don't need center caps & I don't care how they look cosmetically as long as they are straight. Ideally I would like something cheap and local, but I'm not set on it. If somebody has a set of lightweight...

First off, I'd like to apologize if this has been covered before. I quickly glanced at the FAQ's and did a basic search. Here is my question though. I'm toying with the idea of upgrading my 5sp '91 tranny with the Type-R R&P and shortgears (Also upgrading the clutch while it's all apart)...

Any suggestions on a good Sacramento area shop to get an alignment done? I recently installed a set of Intrax coils and will be swapping out a bent tie rod within the next week or so. Is the local Les Schwab acceptable? I just want it done right the first time. Thanks!! ------------------...

I'm am in the process of lowering my car with a set of Intrax springs. When I had the pass. side front wheel off, I noticed that the tie rod (link?) was bent. I feel a little dumb for asking, but I just want to make sure... This isn't supposed to be this way is it? If not, I guess the car...