Will NA2 rear brakes clear NA1 wheels?

[s2kadrenalin]

hey guys,

I have a set of CCW's on my NA1 94 coupe. I bought them 2nd hand and they came off an NA2. To fit them to the rear of my car I bought some NA2 brakes / calipers / rotors / brake lines from a member on Prime. I've yet to install them and am currently running 5mm slip on spacers only.

I need to know, will my '94 7 spoke NA1 rims clear the NA2 brakes if I decide to remove my CCW's and go back to OEM (with the NA2 brakes installed)??

TIA.

 

[scorp965]

1997-2001 NA2's came with the same 7-spokes as '94-'96 cars, so yes, they will clear.

 

[Hapa88]

The stock 7 spoke wheels (found on 1994-2001 cars) will fit all year NSXs and their brakes.

http://www.nsxprime.com/wiki/Wheel_Tech#Can_I_Swap_OEM_Wheels_Between_NSX_Model_Years.3F

 

[nsxtasy]

You seem to be confused. There is no such thing as "NA2 brakes" or "NA1 wheels".

NA2 is an engine code for the 3.2-liter engine which was mated to the six-speed manual on the '97-05 NSX. NA1 is the engine code for the 3.0-liter engine which was on all '91-96 NSX and on the '97-05 automatics.

The NSX was sold with two versions of brakes, one on the '91-96 NSX, and the revised version on the '97-05 NSX.

The NSX was sold with three versions of wheels. The '91-93 NSX had 15"/16" five-spoke wheels. The '94-01 NSX had 16"/17" seven-spoke wheels (with a different finish for '94-96 vs '97-01, but otherwise the same). The '02-05 NSX had 17"/17" wheels.

As scorp noted above, during '97-01, cars with the '97-05 brakes were sold with the '94-01 wheels, so yes they will fit.