My ABS pump motor is running continuously. This is after I rebuilt the ABS modulator and solenoids with new O rings and bled it. Any ideas on where I could have a leak. It seems like the accumulator is the next item to test. How do you determine if it is good or bad?
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
ABS accumulator testing
- Thread starter scott
- Start date
If you are seeing bubbles in the ABS reservoir, a solenoid valve itself could be leaking.
Here is one way of freeing a stuck solenoid. Air can be used to help exercise the bad solenoid.
http://www.nsxprime.com/forum/showthread.php/179115-Save-your-LHD-ABS-with-some-help-from-a-RHD-ABS
accumulators do eventually fail. they are filled with an inert gas, that once leaked out, can cause similar problems.
Here is one way of freeing a stuck solenoid. Air can be used to help exercise the bad solenoid.
http://www.nsxprime.com/forum/showthread.php/179115-Save-your-LHD-ABS-with-some-help-from-a-RHD-ABS
accumulators do eventually fail. they are filled with an inert gas, that once leaked out, can cause similar problems.
No not seeing bubbles in the ABS reservoir.
Wondering if the accumulator can be recharged rebuilt? There was a post mentioning someone had done this. The accumulator is going for $672. Kinda high for crappy ABS.
Wondering if the accumulator can be recharged rebuilt? There was a post mentioning someone had done this. The accumulator is going for $672. Kinda high for crappy ABS.
Looks like this is a source for recharging the accumulator.
https://sites.google.com/site/audicqturbo/audibomb
https://sites.google.com/site/audicqturbo/audibomb
Similar threads
- Locked
