I have 6 denso 550cc fuel injectors for sale. 5 or the 6 have been just been cleaned and flow tested while one injector is was purchased separate from the five new so it didn't need to be cleaned and flow tested. I had these on my NSX for 900 miles and then I got the bug for more power. I am including some left over O rings and gaskets that I have even though most of the gaskets on the injectors are fresh. I think I have 5 sets of the gaskets.
Anyway here are the specs:
Flow Rate in CC per minute: 550CC/min @ 43.5 PSI or 3 BAR
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
I'm asking $250.00 OBO. Email me for the fastest response at [email protected]
JR
Anyway here are the specs:
Flow Rate in CC per minute: 550CC/min @ 43.5 PSI or 3 BAR
Resistance: 12.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
I'm asking $250.00 OBO. Email me for the fastest response at [email protected]
JR
Attachments
Last edited:
