- Joined
- 22 February 2002
- Messages
- 97
Hello,
I recently did a Dan’s solenoid flush on my 92 NSX (90K miles driven about 5 times/year the last 10+ years) to solve the problem of ABS pump running every few minutes. The fluid that came out was clean and everything work as described in Dan’s procedure. Unfortunately the problem didn’t go away during test drive. I think the accumulator is o.k (though I am not sure) since there was pressure to cause fluid flushed back as each solenoid was energized. On first start (after overnight) the pump runs for about 1+ min, then after that during driving, it’d run for a few secs every few minutes. So it seems pressure is leaking somewhere.
Would rebuilding the modulator using Warren’s kit solve this or it’s likely a bad accumulator?
Thank you for your opinion.
Nguyen
I recently did a Dan’s solenoid flush on my 92 NSX (90K miles driven about 5 times/year the last 10+ years) to solve the problem of ABS pump running every few minutes. The fluid that came out was clean and everything work as described in Dan’s procedure. Unfortunately the problem didn’t go away during test drive. I think the accumulator is o.k (though I am not sure) since there was pressure to cause fluid flushed back as each solenoid was energized. On first start (after overnight) the pump runs for about 1+ min, then after that during driving, it’d run for a few secs every few minutes. So it seems pressure is leaking somewhere.
Would rebuilding the modulator using Warren’s kit solve this or it’s likely a bad accumulator?
Thank you for your opinion.
Nguyen