Hey guys,
This will be my first FI car so i don't know much about it. About to pull my hair out trying to figure out what i need
to do. I have searched but that gets even more confusing since most people go a different route. My plan is to use
low boost and a AEM FI/C to control it.
I would really appreciate any help with this that you can give.
Here is what i have.
2002 3.2
Whipple high boost kit
Here is what i will use.
AEM FI/C
High flow injectors (RC SL9-0550 550cc @ 43.4psi)
Low boost pulley
fuel pump (probably OEM)
So first, i need to know if any of the electrical/fuel devices (modifiers, regulator)
from the kit will need to be used or will it just be mounting the sc and installing the FI/C.
Also besides the pulley and belt is there anything from the high boost kit that needs to be changed?
Thank you
Mike
This is my running list.
Parts i have purchased
1. Whipple sc for 3.2
2. AEM FI/C 30-1911
3. Low boost pulley (91mm)
4. Injectors (RC SL9-0550 550cc @ 43.4psi)
5. Elbow repair kit (Driving Ambition)
6. Fuel line fitting (Earl's)
7. New blower belt
8. New fuel filter
9. FI/C harness adapter
Also i will be doing the TB, WP and valve adjustment at the same time. I only have about 28k
but i feel better doing it before the install.
This will be my first FI car so i don't know much about it. About to pull my hair out trying to figure out what i need
to do. I have searched but that gets even more confusing since most people go a different route. My plan is to use
low boost and a AEM FI/C to control it.
I would really appreciate any help with this that you can give.
Here is what i have.
2002 3.2
Whipple high boost kit
Here is what i will use.
AEM FI/C
High flow injectors (RC SL9-0550 550cc @ 43.4psi)
Low boost pulley
fuel pump (probably OEM)
So first, i need to know if any of the electrical/fuel devices (modifiers, regulator)
from the kit will need to be used or will it just be mounting the sc and installing the FI/C.
Also besides the pulley and belt is there anything from the high boost kit that needs to be changed?
Thank you
Mike
This is my running list.
Parts i have purchased
1. Whipple sc for 3.2
2. AEM FI/C 30-1911
3. Low boost pulley (91mm)
4. Injectors (RC SL9-0550 550cc @ 43.4psi)
5. Elbow repair kit (Driving Ambition)
6. Fuel line fitting (Earl's)
7. New blower belt
8. New fuel filter
9. FI/C harness adapter
Also i will be doing the TB, WP and valve adjustment at the same time. I only have about 28k
but i feel better doing it before the install.
Last edited: