need help about TEIN s-tech spring with 255/35/18 rear wheel with spacer.

[monarch_kiss]

the rims i bought (215-40-17 front , 255-35-18 rear) must install a spacer on the rear wheel in order to put on my car. and i plan to get a set of TEIN s-tech lower springs..
TEIN s-tech only provide 0.7/1.0 drop..
i wonder if i have such combination...will my rear tires scrape ?.

 

[ryans]

the rims i bought (215-40-17 front , 255-35-18 rear) must install a spacer on the rear wheel in order to put on my car. and i plan to get a set of TEIN s-tech lower springs..
TEIN s-tech only provide 0.7/1.0 drop..
i wonder if i have such combination...will my rear tires scrape ?.

I installed Stech's on my car. I don't even notice a difference in drop.

 

[monarch_kiss]

I installed Stech's on my car. I don't even notice a difference in drop.

can u show me some of the pic of ur nsx...i am very concern about the ride height and i wanna make sure after i get the TEIN s tech wont bother me when i ride around on street..thanx

 

[Scin]

My car is running TEIN s-tech with a 255/35/18 tire in the rear. There are some pics here: http://www.nsxprime.com/forums/showthread.php?t=65266 and recent ones while on the track here: http://www.nsxprime.com/forums/showthread.php?t=65857

I am also running Bilsteins but they are on the top perch.

 

[monarch_kiss]

My car is running TEIN s-tech with a 255/35/18 tire in the rear. There are some pics here: http://www.nsxprime.com/forums/showthread.php?t=65266 and recent ones while on the track here: http://www.nsxprime.com/forums/showthread.php?t=65857

I am also running Bilsteins but they are on the top perch.

thanx alot man...da's exactly what i need to see...it looks perfect for street ride..by the way..realli nice pics there...nice rims too...

 

[NSX Status]

the rims i bought (215-40-17 front , 255-35-18 rear) must install a spacer on the rear wheel in order to put on my car. and i plan to get a set of TEIN s-tech lower springs..
TEIN s-tech only provide 0.7/1.0 drop..
i wonder if i have such combination...will my rear tires scrape ?.

It shouldn't rub, but then again, depends on offset and camber.... If you local, swing it on by and we'll take a look at it for you!

 

[RP-Motorsports]

The NSX rear fender can hold a 315 tire, so you will not have rubbing issues (normal NSX offsets +30 to +45)

Go with the Eibachs if you want a tad lower, with the same ride.