-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
Procar Specials NSX
- Thread starter Procar Specials
- Start date
Some more parts are produced and will be shipped next 2 weeks.
Very important is to find the right sized boxes, oversea shipment is very very expensive these days.
Very important is to find the right sized boxes, oversea shipment is very very expensive these days.
Attachments
Last edited:
Lot of new cf toys for our beloved NSX.
We have a lot of exterior and interior cf parts into our portfolio (more than 100 different parts), most exterior parts are special order and will be produced after incoming order.
Please remember that we have some waiting time.
Feel free to send inquiries to:
[email protected]
Carbonfiber parts made in Germany
Hope you like what you see .-))
We have a lot of exterior and interior cf parts into our portfolio (more than 100 different parts), most exterior parts are special order and will be produced after incoming order.
Please remember that we have some waiting time.
Feel free to send inquiries to:
[email protected]
Carbonfiber parts made in Germany
Hope you like what you see .-))
Attachments
we got 2 more kits of the Procar NSX-R replica dials. (cf design)
1x 180 mph kit w/o fuel advice
1x 320 km/h kit
needle stickers are included, but not available separate
price incl door to door shipment and paypal is 570 Euro
So if you wanna order a set, please contact us:
[email protected]
1x 180 mph kit w/o fuel advice
1x 320 km/h kit
needle stickers are included, but not available separate
price incl door to door shipment and paypal is 570 Euro
So if you wanna order a set, please contact us:
[email protected]
Attachments
Procar news:
The new wiring for the lockout box of the NSX-R 6MT gearbox is in preparation, also a new catchtank for the gearbox oil mist. Still have the problem that the gearbox sprays some oil out of the breather hose at higher speeds over 250 km/h.
The new system should lead the oil back into the gearbox.
A new PCV valve must be installed, the old was gone.
A new PCV valve is 75 Euro in Germany, crazy.
Because using the NA2R valve covers at NA1 engine, there is a special solution for the rear bank.
Now it will be replaced with a black unit
The new wiring for the lockout box of the NSX-R 6MT gearbox is in preparation, also a new catchtank for the gearbox oil mist. Still have the problem that the gearbox sprays some oil out of the breather hose at higher speeds over 250 km/h.
The new system should lead the oil back into the gearbox.
A new PCV valve must be installed, the old was gone.
A new PCV valve is 75 Euro in Germany, crazy.
Because using the NA2R valve covers at NA1 engine, there is a special solution for the rear bank.
Now it will be replaced with a black unit
Attachments
Nice design!
Actual status of produced parts, which are for sale now, more will follow next few weeks after easter holidays.
1x Procar cf cooling panel for NSX NA (1991-2005)
cf radiator brackets as option available too
prices:
cooling panel 1000 Euro
radiator brackets 450 Euro
(as set 1400 Euro)
+ shipment
1x Procar cf cooling panel for NSX NA (1991-2005)
cf radiator brackets as option available too
prices:
cooling panel 1000 Euro
radiator brackets 450 Euro
(as set 1400 Euro)
+ shipment
Attachments
how hard is it to install these? i would assume it takes some delicate/surgical hands. Are the needles just stickers? or a piece of overlay that attached to the existing needle? do you have one with fuel indicator light?
The kit was concepted and produced fitting over the existing dials, because the center borings of the replica dials are a big wider as the OEM dials, so its a very easy job.
Big advantage of our dials is that there is no electrical adjustment for the gauges necessary after installation, because the needles dont get touched. (Removing the needles would be a job for specialists)
All to know is to strip each dial over the needle and attach the yellow needle stickers, which have a special material and fits perfect.
There are only 2 versions availabe like showed at the picture.
Attachments
Thanks for the info. Will there be another run of the NA1R cluster?
What exactly do you mean?
What is the NA1R cluster?
I think he means the black CF background and yellow needles of the NA1 NSX-R gauges.
The NA1R visor kit ( cf look part) is discontinued in japan.
I sold my last one in stock some weeks before to a customer in USA without knowing, I cant buy another one.
So Procar decided to make their own (real) cf version into the near future.
The NA1R dial faces are special production, but can be ordered within short time.
The special needle stickers are always in stock.
I sold my last one in stock some weeks before to a customer in USA without knowing, I cant buy another one.
So Procar decided to make their own (real) cf version into the near future.
The NA1R dial faces are special production, but can be ordered within short time.
The special needle stickers are always in stock.
New parts for US and European customers produced, packed and shipped.
NA2RR cf hood
NSX-R cf hood screen
cf NSX-R LHD airduct
RGT diffusor
NA2RR cf hood
NSX-R cf hood screen
cf NSX-R LHD airduct
RGT diffusor
Attachments
Sorry no. The JDM NSX-R engine cover is perfect, no other version can top it
I have a used Seibon CF engine cover for sale--PM me if you're interested.
NSX NA parts for sale
ABS Killer kit (discontinued)
250 Euro
cf OEM battery holder
400 Euro
Comptech short shifter (discontinued)
300 Euro
rear chassis stabilizer bar (discontined)
300 Euro
shipment is extra, please email or pm for more details
[email protected]
ABS Killer kit (discontinued)
250 Euro
cf OEM battery holder
400 Euro
Comptech short shifter (discontinued)
300 Euro
rear chassis stabilizer bar (discontined)
300 Euro
shipment is extra, please email or pm for more details
[email protected]
Attachments
Similar threads
