Procar Specials NSX

[Procar Specials]

last saturday I removed the CD changer out of the trunk area.
Because of the race supension, listening to the music was no fun because of jumping CD's.

It ended with an overall weight reduction of 3.2 kg

Installed the GROM iPod/USB adapater, which is a great add to the excisting
stereo.
No need to buy an iPod, actually I'm using a 2GB USB stick.
Very easy plug and play installation. (yes, the antenna is removed too)
There is a limit to 6 x 99 songs (6 folders) but nearly 600 songs are not too bad. :biggrin:
Result: I can highly recomment that system.

Here some pictures from the installation.

 

[Procar Specials]

We have modified the OEM stereo.
Removed the casett player and integrated the USB hub from iPod adapter
with a cf cover.
Looks modern now and works fine :biggrin:

Daylight pictures soon......

 

[ChristianNSX]

This is exactly what I'm looking for.
Thanks that I can send you my radio for the same USB hub modification.
Do you have pictures from the inside of the radio?

 

[Procar Specials]

This is exactly what I'm looking for.
Thanks that I can send you my radio for the same USB hub modification.
Do you have pictures from the inside of the radio?

Actually not because I was in hospital for longer time.
Will take some pictures during modification and send it to you later.
Will start work again monday 05th october, your radio will be one of first jobs on my to do list, well finally I have 5 radios for that job here now :smile:

 

[Procar Specials]

Production information:
Actually 5 sets of the superlight cf front and rear bumper beams are in production now.
1 set is still available.

A new part will be introduced until middle of next month,
the Procar cf engine tower brace for coupe



We also concepting a new 330mm BBK kit for the rear of the NSX with
AP rotors and stock calipers, same system as our front BBK.

The cf triangle braces for Targas are out of stock actually, but we plan to have 2 units for sale beginning of december.

The RWG's (rear windshield garnishes)are also sold, a new bunch will be produced until january 2010 (10 units)

 

[Procar Specials]

actual production news:

Procar cf front bumper beams: available monday 11-16
Procar cf rear bumper beams: available monday 11-16

prototype of new
Procar cf rear engine tower brace for coupe:
available monday 11-16

cf triangle braces for coupes have delay, will not be produced until february 2010
same for 2x RGT cf diffusor

actually in stock:
1x cf B pillar covers
1x cf side vents
1x cf airbox
1x cf fender scoop
1x cf cooling panel
1x NA1 cf airduct
1x cf deck lid spoiler (the small spoiler)
1x NSX-R cf diffusor (02+ rear valence)
1x cf alternator cover
1x cf windshield wiper spoiler
1x cf cruise control cover
1x cf center console (OEM radio) with ashtray cover
1x cf nav pod
1x NA1/2 (-01) cf headlight covers
1x GT cf wing

1x front tower brace LHD for use with OEM plastic cover
1x aluminium front bumper beam


Please ask for offers incl dtd shipment
Part pictures here:

 

[Procar Specials]

delete

 

[Senninha]

some spy photos from the new
Procar cf rear strut bar for coupe

The part is superlight and very strong, finally it will get the HIGH GLOSS finish next week. More photos in 2 weeks, than we start the sale :smile:

Hi Detlef,

Could you offer it without the high-gloss finish? Just my thoughts but it may appeal to a wider audience and in particular those owners with little or no other CF parts as the non gloss looks very OEM.

Good luck with the parts

regards, Paul

 

[Procar Specials]

Hi Detlef,

Could you offer it without the high-gloss finish? Just my thoughts but it may appeal to a wider audience and in particular those owners with little or no other CF parts as the non gloss looks very OEM.

Good luck with the parts

regards, Paul

Hi Paul,
no problem, that part can be ordered without high-gloss finish too.
Will post pictures after installation.

 

[Procar Specials]

some spy photos from the new
Procar cf rear strut bar for coupe

The part is superlight and very strong.
This is the HIGH GLOSS version, standard cf version is available too.

The part can be ordered now.

 

[Procar Specials]

some spy photos from the new
Procar cf rear strut bar for coupe

The part is superlight and very strong.
This is the HIGH GLOSS version, standard cf version is available too

.

That part is sold.
2 more units will be available production week 51

We also will have 3x RGT cf diffusors in stock middle of january 2010

 

[Procar Specials]

even the Procar NSX need some service from time to time. :smile:
Actual (preventive) work:
cooling hoses change (23x) incl thermostat and coolant expansion tank.

 

[greenberet]

My God that's clean

 

[Senninha]

My God that's clean

A combination of very low mileage and dry use only ... and having been in it, it definately is that clean!!!

 

[3.5lnsxr]

2nd unit is sold too, thanks.


We got some inquiries about that part.
Procar RGT cf diffusor
That part is special production, production will start after incoming order only,
means we dont stock them.

my car is been drop down about 2 inch. will this RGT diffusor will be ok to be used? how tall are from the ground, am afraid it will hit the ground on a bumpy road if it to close to the ground

thanks

 

[Procar Specials]

My God that's clean

well, it looks quite clean, but 17 years are 17 years.

my car is been drop down about 2 inch. will this RGT diffusor will be ok to be used? how tall are from the ground, am afraid it will hit the ground on a bumpy road if it to close to the ground

thanks

2-3 inch ground clearance.
The diffusor is very strong and the brackets are high adjustable, so thats not really an issue.


Last weekend I finished the cooling hose replacement project.
no 22+23, the hoses around oil cooler were the last ones.
It took some time and a special selfmade tool to install the small hose all the way on the aluminium tube,
even by using lot of silicone spray, but finally it worked.
It was an exacting DIY job, a great experience.
But my hands and fingers are happy that this torture has an end.

 

[Procar Specials]

Last step at the cooling hoses replacement work was the thermostat change.
Amazing how an 17 year old water canal looks without cleaning.
Like new, no oxidation.

Finally the old thermostat was bad, is was opened all the time.
Good to know that this problem is fixed now.

yes....the coolant is still the old green one.
It will be replaced by the new blue Type 2 coolant next week.

 

[RYU]

2-3 inch ground clearance.
The diffusor is very strong and the brackets are high adjustable, so thats not really an issue.

Any idea how this would look on a non-02+ rear? I really like this piece.

 

[Procar Specials]

Any idea how this would look on a non-02+ rear? I really like this piece.

Well, its a nice part with probably the best fitment and finish of all diffusors.
But this part is concepted for perfect fitment with 02+ rear valence.

Actually I have 3 of these RGT diffusors in production, all preorders.

Because the old rear is very different from style and dimensions, I would assume that it wont fit, but I dont have tested it.

Surely the rear end of the RGT diffusor can be cutted and with some extra work it should fit, but I'm sceptic if it will look that nice.

IMO best way to go:
02+ rear valence
+ R diffusor
+ RGT diffusor

Finally it looks like HONDA made all of it.

 

[drtruong]

How much would it run for this beautiful diffusor?

 

[Procar Specials]

How much would it run for this beautiful diffusor?

1.150 Euro + shipment
All holders and brackets are carbonfiber too, so its a very exclusive part.
2 of them will be seen on US NSX's soon.

Another detailed shoot

 

[Procar Specials]

5 of the Procar RGT cf Diffusors are produced.
2 are shipped to USA already, the rest was completed here.

 

[tpsmak]

That is a bad ass car!

 

[3.5lnsxr]

5 of the Procar RGT cf Diffusors are produced.
2 are shipped to USA already, the rest was completed here.

I can't wait to get my

 

[WingZ]

Any NA2RR hoods in stock?