• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Seat removal with seat stuck forward

Joined
11 October 2001
Messages
127
Location
Daytona Beach, FL
I just got my car back from the shop and the passenger seat is stuck forward. I reached under the front and found 2 leads unplugged. One is male and the other is female, but they don't go together. I can't get to the front seat bolts either. Neither seat function works and the fuses are good.

This is a bit of a mystery. Are there 2 sets of plugs under the seats?
 
no, under the seat there is only one connector, can be that the connector is damaged or crushed???:confused:
 
There are actually two connectors for the drivers seat.

2 pin for the indicator that the seat belt is snapped(switch in clasp for the seat belt)
5 pin for the seat movement motors

I would see if you could fish out the 5 pin and check it. A swivel set of sockets may get you to the front bolts.

I know the back ones are impossible if the seat is all the way back.

If you can get to the back bolts, undo them and raise the seat by the back slightly to fish out the wires, or maybe get to them;).

HTH,
LarryB
 
Back
Top