Someone help me please with measurements

[Type-SR]

So I like downforces CF license plate holder seen here.

It kinda looks like it will fit my prelude.

Except for the part at the bottom it seems to slope more than the NSX.

Can someone ever so kindly just measure the license plate area of their nsx for me please !

 

[simonprelude]

Have you got any links to the downforce plate ??

 

[Type-SR]

http://downforce.biz/cart/product.php?productid=16139&cat=24&page=1

Do you own both a prelude and a NSX ?

 

[simonprelude]

Yes, and S2000 and Integra type R and CRX delsol

But thanks for the info, my NSX has sagging number plate surround problem

 

[Type-SR]

will you make measurements for me ? help a fellow Honda brother out.

 

[Type-SR]

anyone ??

 

[simonprelude]

Sorry, been away, I will do the measurements, but mine is a UK car so I am not sure if that is the same as a US car, will chat to someone I know in the UK with an Acura to see if it is the same also.

That will then help me as I might be replacing this part on mine.

anyone ??

 

[Type-SR]

Sorry, been away, I will do the measurements, but mine is a UK car so I am not sure if that is the same as a US car, will chat to someone I know in the UK with an Acura to see if it is the same also.

That will then help me as I might be replacing this part on mine.

Thanks Simon!

do you have those long license plates in the UK ? if not I think they are all standard size... I can't see car companies making different sized license plate areas for every country. The only different sizes I've seen are the long narrow plates and the standard rectangular plates we have in north america.

I'll be waiting to hear from you

 

[simonprelude]

OK asked a couple of people and the answer is it.....

There would be no point me measuring as we do indeed have the long ones

Sorry I can't help, someone else please help this guy out.

 

[ctrlaltdelboy]

I'll take some measurements of mine tomorrow and post them for you.

 

[Type-SR]

I'll take some measurements of mine tomorrow and post them for you.

Thanks but you're from the UK as well !! you probably have the long plates.

 

[ctrlaltdelboy]

Thanks but you're from the UK as well !!

yes indeedy

you probably have the long plates.

nope - I upgraded to a US rear end 2002+ facelift stylee

before

changing

after (that's me on the right )

 

[simonprelude]

Yes I asked Darren for you as I knew he had the Acura rear end

Thanks but you're from the UK as well !! you probably have the long plates.

 

[Type-SR]

ok excellent !! Thanks Darren and Simon!

I'll be waiting for those measurements.

 

[ctrlaltdelboy]

ok, here you go - excuse the dodgy photo quality, I took them on my phone and then shrank them down for posting here.

width of recess

close up on measurement

height of recess

depth of recess

I also measured the depth at the lower point, but the picture didn't come out - it was 2" (compared to the upper depth reading of 3")

hope this does the job for you

 

[Type-SR]

Thanks Darren !!

looks like it won't fit

Width NSX 39cm Prelude 34cm
Length NSX 10cm Prelude 10cm
Depth NSX 7.5cm Prelude 5cm

Oh well.... and thats the end of that.

 

[Type-SR]

actually I'm going to measure it again... maybe we didn't use the same measure points.