-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
Ultimate NSX wheel guide!
- Thread starter RP-Motorsports
- Start date
let's get the ball rolling on this thread once again!
NSX Prime name: Brylek
Year NSX: 2004
Rim brand, and type: RO_JA R25
Rim size f/r : 18X8" / 19X10.5
Rim offset f/r: +33mm / +32mm
Tire size f/r: 215/35/18 / 275/30/19
BBK? if so brand: NO
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?: 9.5" in the back, the rest is fine.
Year NSX: 2004
Rim brand, and type: RO_JA R25
Rim size f/r : 18X8" / 19X10.5
Rim offset f/r: +33mm / +32mm
Tire size f/r: 215/35/18 / 275/30/19
BBK? if so brand: NO
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?: 9.5" in the back, the rest is fine.
NSX Prime name: Brylek
Year NSX: 2004
Rim brand, and type: Volk CE28n
Rim size f/r : 17X7.5" / 18X9.5
Rim offset f/r: +43mm / +40mm
Tire size f/r: 215/40/17 / 255/35/18
BBK? if so brand: NO
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?: This setup is perfect.
Year NSX: 2004
Rim brand, and type: Volk CE28n
Rim size f/r : 17X7.5" / 18X9.5
Rim offset f/r: +43mm / +40mm
Tire size f/r: 215/40/17 / 255/35/18
BBK? if so brand: NO
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?: This setup is perfect.
work vs xx i assume^^^
right on!
i'll be sure to update this when i have the wheels mounted on an nsx!
NSX Prime name: myw
Year NSX: no car yet haha!
Rim brand, and type: Work vs xx (i had these originally gold wheels powdercoated faces gloss black).
Rim size f/r : 17X8" / 18X9
Rim offset f/r: +30mm (i know, i know too agressive)/ +38mm
Tire size f/r: 215/40/17 / 255/35/18
BBK? if so brand: NO
Spacers needed f/r:
Extended lugs? f/r:
Front tire rubbing? inside/outside: hopefully with downforce jdm wide front fenders there won't be.
Tire rubbing rear?:
Suspension: have KW V3 waiting and ready to go
If you could re-order your current set-up, what would you change?: after fitting the wheels on the car and driving till the tires die out; i am likely going to extended the front lip 1/2-1" (17x8.5-9, 2 inch lip) and rear lip 1 inch 18x10 (3.5 inch lip). not sure if this dream setup will clear the fronts safely so i'll have to drive the car a season first with the current setup first and work from there
Attachments
Last edited:
NSX Prime name: Oyagi
Year NSX: 1992
Rim brand, and type: Advan RS
Rim size f/r : 17x8 / 18x10
Rim offset f/r: +37mm / +35mm
Tire size f/r: 215/40/17 / 285/35/18
BBK? if so brand: YES, AP Racing SoS KVR kit
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: Tein Flex
If you could re-order your current set-up, what would you change?: Nooope!
Year NSX: 1992
Rim brand, and type: Advan RS
Rim size f/r : 17x8 / 18x10
Rim offset f/r: +37mm / +35mm
Tire size f/r: 215/40/17 / 285/35/18
BBK? if so brand: YES, AP Racing SoS KVR kit
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: NONE
Tire rubbing rear?: None
Suspension: Tein Flex
If you could re-order your current set-up, what would you change?: Nooope!
Last edited:
- Joined
- 22 May 2007
- Messages
- 115
Oyagi, I need your help. I’m trying to get my stance height similar to yours. I have nearly an identical wheel setup but they are Advan RZs. Any advice would be appreciated. I'm looking into a coilover kit, but I have a few questions below.
1. What brand tire are you running?
2. Did you adjust the camber?
3. Are you running a camber kit?
NSX Prime name: Keeptrying
Year NSX: 1991
Rim brand, and type: Advan RZ
Rim size f/r : 17x8 / 18x10
Rim offset f/r: +37mm / +35mm
Tire size f/r: Nitto NT01 225/45 front and 275/40
BBK? if so brand: YES, Stoptech
Spacers needed f/r: Yes front only just to be safe, will begin experimenting shortly
Extended lugs? f/r: None
Front tire rubbing? inside/outside: Yes, both
Tire rubbing rear?: None
Suspension: Bilstein, Type S Springs, Type R sway front and type S rear, Cedar non-compliance clamps
If you could re-order your current set-up, what would you change?: I would definitely change a few things. The tire size is simply too large. I really like the way the car handles right now but it’s sitting high and still rubbing. Hopefully, Oyagi can give me some advice.
1. What brand tire are you running?
2. Did you adjust the camber?
3. Are you running a camber kit?
NSX Prime name: Keeptrying
Year NSX: 1991
Rim brand, and type: Advan RZ
Rim size f/r : 17x8 / 18x10
Rim offset f/r: +37mm / +35mm
Tire size f/r: Nitto NT01 225/45 front and 275/40
BBK? if so brand: YES, Stoptech
Spacers needed f/r: Yes front only just to be safe, will begin experimenting shortly
Extended lugs? f/r: None
Front tire rubbing? inside/outside: Yes, both
Tire rubbing rear?: None
Suspension: Bilstein, Type S Springs, Type R sway front and type S rear, Cedar non-compliance clamps
If you could re-order your current set-up, what would you change?: I would definitely change a few things. The tire size is simply too large. I really like the way the car handles right now but it’s sitting high and still rubbing. Hopefully, Oyagi can give me some advice.
Last edited:
KT, beautiful car. It's pretty much what I would like to do cosmetically to mine (if I can only get off the fence over the '02 conversion).
I'm running Dunlop Star Specs 215 40 17 and 285 35 18. No camber kit, alignment done as close to eom setting as possible. What kind of coil over are you using? I'm on Tein flex set according to their suggested settings. I had to raise the front 1/2 turn just so I don't destroy my front lip.
For those that don't know... such a tool exists at rimtuck.com
http://rimtuck.com/search/datasheet&make=Acura&model=NSX&
Only a handful of NSXes on there, but it's a very well designed database.
I encourage other owners to upload their setups and photos there.
http://rimtuck.com/search/datasheet&make=Acura&model=NSX&
Only a handful of NSXes on there, but it's a very well designed database.
I encourage other owners to upload their setups and photos there.
Oyagi, I need your help. I’m trying to get my stance height similar to yours. I have nearly an identical wheel setup but they are Advan RZs. Any advice would be appreciated. I'm looking into a coilover kit, but I have a few questions below.
1. What brand tire are you running?
2. Did you adjust the camber?
3. Are you running a camber kit?
NSX Prime name: Keeptrying
Year NSX: 1991
Rim brand, and type: Advan RZ
Rim size f/r : 17x8 / 18x10
Rim offset f/r: +37mm / +35mm
Tire size f/r: Nitto NT01 225/45 front and 275/40
BBK? if so brand: YES, Stoptech
Spacers needed f/r: Yes front only just to be safe, will begin experimenting shortly
Extended lugs? f/r: None
Front tire rubbing? inside/outside: Yes, both
Tire rubbing rear?: None
Suspension: Bilstein, Type S Springs, Type R sway front and type S rear, Cedar non-compliance clamps
If you could re-order your current set-up, what would you change?: I would definitely change a few things. The tire size is simply too large. I really like the way the car handles right now but it’s sitting high and still rubbing. Hopefully, Oyagi can give me some advice.
your tire sizes are too tall,do you get any tcs issues?
That's what I was thinking too. Reminds me of Cars animated movie.
NSX Prime name - Dhalsim
year NSX - 91
Rim brand, and type - TSW Kyalami
rim size f/r - 18x8+40
rim offset f/r - 19x9.5+35
tire size f/r - 215/40/18 / 265/30/19
BBK? if so brand - No
spacers needed f/r - No
extended lugs? f/r - No
lowered? with what setup? - Stock springs with Bilsteins on lower perch
front tire rubbing? inside/outside - front rubbing on full lock.no rubbing in rear
tire rubbing rear?
if you could re-order your current set-up, what would you change? - Smaller, lighter wheels
Wheels for sale very soon!
year NSX - 91
Rim brand, and type - TSW Kyalami
rim size f/r - 18x8+40
rim offset f/r - 19x9.5+35
tire size f/r - 215/40/18 / 265/30/19
BBK? if so brand - No
spacers needed f/r - No
extended lugs? f/r - No
lowered? with what setup? - Stock springs with Bilsteins on lower perch
front tire rubbing? inside/outside - front rubbing on full lock.no rubbing in rear
tire rubbing rear?
if you could re-order your current set-up, what would you change? - Smaller, lighter wheels
Wheels for sale very soon!
Last edited:
I had the tires removed a while back and cant remember the sizes. I might be able to blow up a pic and see the sizes on the sidewalls.
So you don't have this wheel setup anymore?
I have the wheels but not the tires
Absolutely! BTW - I found some pics I was able to blow up and get the sizes off so I will edit my previous post.
year NSX- 1994
Rim brand, and type- FORGESTAR F14
rim size f/r- 18x8.5
rim offset f/r- 18x10
tire size f/r- 215/435/18 - 285/35/18
BBK? if so brand- cross drilled/slotted rotors
spacers needed f/r- none
extended lugs? f/r- no;
lowered? with what setup?- eibach springs
front tire rubbing? inside/outside- NO
tire rubbing rear?- NO
if you could re-order your current set-up, what would you change?- SPRINGS TO TEIN.
OLD WHEELS:
Rim brand, and type- FORGESTAR F14
rim size f/r- 18x8.5
rim offset f/r- 18x10
tire size f/r- 215/435/18 - 285/35/18
BBK? if so brand- cross drilled/slotted rotors
spacers needed f/r- none
extended lugs? f/r- no;
lowered? with what setup?- eibach springs
front tire rubbing? inside/outside- NO
tire rubbing rear?- NO
if you could re-order your current set-up, what would you change?- SPRINGS TO TEIN.
OLD WHEELS:
NSX Prime name: Caroline-NSX
Year NSX:1996 NSX-T
Rim brand, and type: BC Forged/HB09 Deep Concave
Rim size f/r : 18x8.5/19x10.5
Rim offset f/r:et31/et25
Tire size f/r: 215/35/18-265/30/19
BBK? if so brand: Yes/WP Pro EX 6pot Fronts and Rears
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: None
Tire rubbing rear?: None
Suspension: BC Racing Coilovers
If you could re-order your current set-up, what would you change?: My rear tires to 275/30/19 instead of 265/30/19 - Nothing is Perfect :smile:
Year NSX:1996 NSX-T
Rim brand, and type: BC Forged/HB09 Deep Concave
Rim size f/r : 18x8.5/19x10.5
Rim offset f/r:et31/et25
Tire size f/r: 215/35/18-265/30/19
BBK? if so brand: Yes/WP Pro EX 6pot Fronts and Rears
Spacers needed f/r: None
Extended lugs? f/r: None
Front tire rubbing? inside/outside: None
Tire rubbing rear?: None
Suspension: BC Racing Coilovers
If you could re-order your current set-up, what would you change?: My rear tires to 275/30/19 instead of 265/30/19 - Nothing is Perfect :smile:
NSX Prime name: scammy
Year NSX:1991 Coupe
Rim brand, and type: OZ Racing Superleggera
Rim size f/r : 17x8/18x9
Rim offset f/r:et40/et35
Tire size f/r: 215/35/17-265/30/18
BBK? if so brand: No but going to 97+ soon
Spacers needed f/r: none
Extended lugs? f/r: None
Front tire rubbing? inside/outside: No but when i had 225's on the front they did inside and out
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?:maybe go to a 9.5 or 10 in the rear and some TE37 SL and try swift springs on the KW's
[/IMG]
Year NSX:1991 Coupe
Rim brand, and type: OZ Racing Superleggera
Rim size f/r : 17x8/18x9
Rim offset f/r:et40/et35
Tire size f/r: 215/35/17-265/30/18
BBK? if so brand: No but going to 97+ soon
Spacers needed f/r: none
Extended lugs? f/r: None
Front tire rubbing? inside/outside: No but when i had 225's on the front they did inside and out
Tire rubbing rear?: None
Suspension: KW V3
If you could re-order your current set-up, what would you change?:maybe go to a 9.5 or 10 in the rear and some TE37 SL and try swift springs on the KW's
Last edited:
