D,
Currently attached to grn/yellow (unlock) grn/white (lock) to lock and unlock the doors but it does not arm/disarm the oem alarm nor does it allow it to be armed via the key when the viper brain is plugged in. I might add that it locks/unlocks both doors with one click. When I unplugg the viper brain, the key OEM arm/disarm works fine.
So I guess what your saying is to splice the gry/white with grn/white to lock/arm and splice the grn/yellow iwth grnyellow-2 to disarm/unlock? Currently I dont believe its spliced into the security module..only the pdlcm which would make sense that it doesnt arm/disarm.
Finally, in a previous reply, someone brought up amps...is that a concern or is the 12v signal all good and we are just rerouting the signal to the appropriate port of the security module? I dont want to fry the security module
-------------------------------------------------------------------
Arm/lock input - splice to grey/white wire on 22 pin connector
Disarm/unlock - splice to green/yellow-2 wire on 16 pin connector
-------------------------------------------------------------------
Thanks,
Joseph