I have random interior items for sale. They are for sale since I no longer need them. Items have not been packaged up yet. If we agree on a price I will ask that you hold off making payment until after I box the item up for you.
Update: I'm deleting pictures of sold units to condense the post.
Item 1 for $175 shipped: SOLD
Works Bell Rapfix II quick release with flipper and 2 new wiring plates. Note1: This will not be including the SRS light off jumpter kit. Note2: You will need a short hub boss to install this which is not supplied. Note3: Due to the fact that I didn't look at the Japanese instructions (which I can't read either way lol) I installed the flipper backwards. This has caused some exterior damage (as shown below) and the area under the flipper has multiple divets caused by the setscrew that is part of the flipper setup. I would recommend if you are to use this, that you use it with the flipper only or have it repaired/repainted to cover most of the scratches and divets made by the set screw. Functionally it works just as good as the new Works Bell Rapfix II that I replaced it with. I've already flipped the flipper in the correct orientation and that is how it's pictured below. This is a $439 dollar combo ($349 quick release and flipper $90) and I'm offering it at quite a significant discount. In reality I'm selling the quick release for under 100 dollars if you think about the fact that the flipper is still worth 90 dollars by itself.
Item 2 for $300 shipped: SOLD
Taitec Hub that's been modified. I modified this to allow the use of the momo style horn button retainer ring (It didn't come with taitec horn ring when I got it). I will also supply my own SRS light off jumper kit that I made. Very solid feel
Item 3 for $10 dollars + shipping: SOLD
Mugen Horn Button. This is the horn button that comes supplied with the Mugen III Steering Wheel. I am using a NSX Type-R ring so I don't need this.
Item 4 for 25 dollars + shipping: SOLD
Authentic Civic Type-R Shift Knob Ball is used and has some small surface imperfections. Has one knick in it and what I think are scuffs or maybe discoloration??? Kind of hard to see the scuffs/discoloration under normal viewing angles. Mainly viewable if you are looking down on the shift knob top dead center. I think I was able to get a good angle showing the effect.
Item 5 for $400 + shipping: SOLD
1991 Grey Headliner set
Front edge of Headliner
Vinyl side of Headliner
Here you can see the back of the B Pillars. One has a visible crack which can easily be repaired with some epoxy.
Front of B Pillars
Rear of A Pillars
Front of A Pillars
Rear of Dome Light
Front of Dome Light
Front Seams of Visors. I believe the passenger side visor is the one with a tear in it. Can't be seen in regular driving position.
Cloth side of Visors
Vinyl Side of Visors
Update: I'm deleting pictures of sold units to condense the post.
Item 1 for $175 shipped: SOLD
Works Bell Rapfix II quick release with flipper and 2 new wiring plates. Note1: This will not be including the SRS light off jumpter kit. Note2: You will need a short hub boss to install this which is not supplied. Note3: Due to the fact that I didn't look at the Japanese instructions (which I can't read either way lol) I installed the flipper backwards. This has caused some exterior damage (as shown below) and the area under the flipper has multiple divets caused by the setscrew that is part of the flipper setup. I would recommend if you are to use this, that you use it with the flipper only or have it repaired/repainted to cover most of the scratches and divets made by the set screw. Functionally it works just as good as the new Works Bell Rapfix II that I replaced it with. I've already flipped the flipper in the correct orientation and that is how it's pictured below. This is a $439 dollar combo ($349 quick release and flipper $90) and I'm offering it at quite a significant discount. In reality I'm selling the quick release for under 100 dollars if you think about the fact that the flipper is still worth 90 dollars by itself.
Item 2 for $300 shipped: SOLD
Taitec Hub that's been modified. I modified this to allow the use of the momo style horn button retainer ring (It didn't come with taitec horn ring when I got it). I will also supply my own SRS light off jumper kit that I made. Very solid feel
Item 3 for $10 dollars + shipping: SOLD
Mugen Horn Button. This is the horn button that comes supplied with the Mugen III Steering Wheel. I am using a NSX Type-R ring so I don't need this.
Item 4 for 25 dollars + shipping: SOLD
Authentic Civic Type-R Shift Knob Ball is used and has some small surface imperfections. Has one knick in it and what I think are scuffs or maybe discoloration??? Kind of hard to see the scuffs/discoloration under normal viewing angles. Mainly viewable if you are looking down on the shift knob top dead center. I think I was able to get a good angle showing the effect.
Item 5 for $400 + shipping: SOLD
1991 Grey Headliner set
Front edge of Headliner
Vinyl side of Headliner
Here you can see the back of the B Pillars. One has a visible crack which can easily be repaired with some epoxy.
Front of B Pillars
Rear of A Pillars
Front of A Pillars
Rear of Dome Light
Front of Dome Light
Front Seams of Visors. I believe the passenger side visor is the one with a tear in it. Can't be seen in regular driving position.
Cloth side of Visors
Vinyl Side of Visors
Last edited: