Hello Prime,
I'm not a fan of spamming out my videos one by one so there are many DIY videos that I've never posted here before. Being that I've amassed so many at this point, I thought I'd create a thread to have one place to post them. As always, my DIY's are meant to be able to be followed step by step and include special tools required linked in the description. As I continue to make DIY videos, I'll post them up here. Feel free to post up here with any questions or constructive comments or you can post on the comment section of my videos and I'll respond as soon as possible. I'll try to maintain a Table of Contents in this initial post:
1. MOMO Flush Mount Horn Button Mod
2. Armrest Emblem Replacement
3. Refinish Brake Calipers w/VHT
4. Rebuild Front Brake Calipers
5. Install Stainless Steel Brake Lines
6. Replace Manual Transmission Fluid
7. Replace Wheel Bearing
8. SOS Oil Pressure Sensor
9. Davis Design Fab Coil Guard
10. Prothane Front Upright Poly Bushings
11. Extended Studs & Spacers
12. Fuel Filter replacement
13. Knock Bushing upgrade
14. SOS Stealth license plate frame
15. Alcantara Door Panel Inserts
16. Mugen Pedal upgrade
17. Oil Change
18. OEM type S Steering Wheel + OEM MOMO hub
19. Spoon Monoblock installation
20. Works Bell Hub + Rapfix GTC hub + Renown steering wheel
21. Stanceparts cup kit installation
22. OEM Console removal & Shift Boot Replacement
I'm not a fan of spamming out my videos one by one so there are many DIY videos that I've never posted here before. Being that I've amassed so many at this point, I thought I'd create a thread to have one place to post them. As always, my DIY's are meant to be able to be followed step by step and include special tools required linked in the description. As I continue to make DIY videos, I'll post them up here. Feel free to post up here with any questions or constructive comments or you can post on the comment section of my videos and I'll respond as soon as possible. I'll try to maintain a Table of Contents in this initial post:
1. MOMO Flush Mount Horn Button Mod
2. Armrest Emblem Replacement
3. Refinish Brake Calipers w/VHT
4. Rebuild Front Brake Calipers
5. Install Stainless Steel Brake Lines
6. Replace Manual Transmission Fluid
7. Replace Wheel Bearing
8. SOS Oil Pressure Sensor
9. Davis Design Fab Coil Guard
10. Prothane Front Upright Poly Bushings
11. Extended Studs & Spacers
12. Fuel Filter replacement
13. Knock Bushing upgrade
14. SOS Stealth license plate frame
15. Alcantara Door Panel Inserts
16. Mugen Pedal upgrade
17. Oil Change
18. OEM type S Steering Wheel + OEM MOMO hub
19. Spoon Monoblock installation
20. Works Bell Hub + Rapfix GTC hub + Renown steering wheel
21. Stanceparts cup kit installation
22. OEM Console removal & Shift Boot Replacement
Last edited:
Here are my few so far:
