Search results

OEM service mat that covers the fenders and trunk to protect the car while you work on it. Used only a few times... like new. SOLD Thanks, Prime!!

Car has been sold. Mahalo, Prime!! :smile:

JDM DC5 Type R seats with Taitec sliders to make the installation into a NSX an easy drop in install. Asking $1500 for seats including sliders. Sliders alone sell for over $600/pr. Seats are in very good to excellent condition. Also available is an aftermarket NSX Type R carpet with a course...

Sale Pending 19apr07 1992 NSX 16,250 miles VIN# JH4NA1154NT000106 Changing life situation forces sale of a car that I thought I would be keeping for many years. I searched long and hard before deciding on this particular car. Purchased the car from the original owner, a car collector in...

I might be interested, but would like to see install instructions that come with the kit or at least photos of all the parts of a complete kit. Thanks :smile:

I have DC5R seats in my NSX. The real problem with these is getting a suitable set of rails/sliders to mount them properly. I ended up ordering Taitec rails through SOS and waited about 2 months before they arrived. Seats work well in the NSX with just a bit of touching on the inside bolster...

Nice!! What lower rear bumper/valance is that?

I agree... a forum covering suspension and brakes would be a great addition.

Chassis Tuning & Modifications Tires <TABLE width=400 border=1><TBODY><TR><TD width=101><SMALL>Modification</SMALL></TD><TD width=151><SMALL>To Reduce Understeer or Increase Oversteer</SMALL></TD><TD width=130><SMALL>To Reduce Oversteer or Increase Understeer</SMALL></TD></TR><TR><TD...

Adrian... you mean you actually did a search???? :rolleyes:

Most OEM Honda wheels use ball lugs (rounded). Most aftermarket wheels use cone type (straight tapered) lugs. Remove a lug from one of your wheels and check it to confirm.

Usually, there is a hex head opening in the link stud which you hold with an allen while turning the nut with a wrench.

Used Dali Racing chip... includes brand new ZIF socket. http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=438 One of the better, if not the best, chip for 91-94 NSX. SOLD PM or email

I will add, I've bought a FIT and don't regret it one bit. If you value handling, there is no question. This is one fun car!!! :cool:

hal, Did you receive the stickers I mailed? Very nice box! :cool:

I used 1 qt of fluid doing the flush just to make sure. I ended with pressurizing by using the switch. When the car was started and moved for the first time, the ABS could be heard pressurizing the system and have not heard it since. :)

I was thinking of that, but the box is pretty big as it is... but again, if someone can find a box the perfect size, that's a great idea... I'd even send a Hawaii sticker to the person who has the tool at the time to put onto the inside box. :)

Sorry Bill, I did not. :( The box could use a "refresh" if someone has one the correct size, but then again all those cool stickers would be gone. :eek: I was going to try and find another box, but thought it more important to get the tool back out on the road, ASAP.

Either would look very nice. I think it would come down to personal color preference. Me... I'd choose the red. :) Those seats look very similar to the Recaro Sport seats. http://on-trackperformance.com/recaro_sport.htm If you figure how to get them mounted, please share your info as I'm...

The list, I believe, as of this date is- ak Hal_396 RC51NSX Whatwasthat Cincinnati Scott Mahalo Drew! If there is anything I can ever do for you, please let me know. And a thank you, too, NSXBill2 who incurred a bit higher shipping charges due to me being in Hawaii and refused to take...

Just mailed the tool to ak today.

My condolences to his family and friends. Even in the far reaches on an island in the middle of the Pacific Ocean, his passing brings great sadness. :frown: Rest In Peace, Len.

Just received the tool today from Bill... mahalo! :) ak, check your PM.

For other Recaro seats (SRDs) that were used in previous non NSX cars, I used brackets from a company called Wedge Engineering in California. Don't know if they make a bracket to mate the PP sliders to the NSX chassis, though. If you like I can give you their contact info. Where did you...

Re: good prep. for high-temp. paint & clear-coat... VHT