Search results

All items have been sold. SOLDPrices Lowered. New Pictures. Covercraft Weathershield Car Cover - grey - with lock/cable/bag. Never used outside. Like new. Very compact! Folds much smaller than other covers. Can be laundered in your home machines. $165 + $10 ship. (new discounted price...

SOLD - Peter, if this car brings you half the pleasure it gave to me, you will be a very happy owner. Take care of her. Thanks Prime. 1991 Berlina Black /Black VIN jh4na1152mt001429 5spd manual - Not in snap ring range 37,xxx miles OEM keyless entry with two remotes No accidents No stories...

Anyone know about this future release? It also shows up on Amazon for pre-order.

I have noticed that both the rocker panels on both sides of my car bulge out very slightly that the point noted on this photo. It is just enough to bug me and make the gap at the bottom of the slightly uneven. I did find a free clip behind the passenger intake vent when I installed the AIS a...

Not needed anymore. I spent the buck-fifty! Tks in advance! JT8CD32Z4V1000159

I have those blasted outside, crimp on weights on my front wheels instead of the hidden ones. Going for new front tires tmrw morning. This may be a stupid question, but are they soft enough for me to remove? I don't want the shop to cram a screwdriver in there and I would like to minimize the...

Never mind....I finally got it off :rolleyes: :

Hope this is the correct forum for this post. I have been searching around for the best price on an Optima Yellow Top and found this deal: www.batteries.com Receive 20% off your entire online order when you use your Visa card Use code VISA1 expires 2-28 D34/78 reg. price $169.00 - 20% =...

I have been looking around for a good brake bleeder in either a pump or Pneumatic form. Griot's sells brake bleeder pumps and separate oil change pumps. This one (7300) looks like it does both, which makes sense: I am thinking about the 7300 or the 7200 and adding the brake bleeding accessory...

What is the best way to REMOVE paint from my calipers? I have read dozens of posts and articles on painting them, but nothing on removing the paint. sand/bead blasting? wire brush/dremel? chemicals? : :frown: My red paint is starting to peel on two of mine and I need to get the old off...

I picked this up a month ago from another member and have decided to go another route. Great condition. I paid $45 plus shipping. I will sell for $40 with free shipping to you in the lower 48 states. http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=118 I also have a stock...

I have a new (only assembled, not even tested) XMODS RC car for sale. It comes with the case, radio shack batteries and the extra body kit (body kit still in package). Total cost was around $75 with batteries, extra body and tax. I will sell it for $50 shipped to you in the lower 48 states. I...

I am planning on upgrading my POS 1/2" torque wrench to something nicer and more accurate. Looking at craftsman and snap on. Any recommendations? Should I also get a 3/8" torque wrench for non-wheel work? Tks in advance.

I am a club member and just noticed as I was renewing that the benefits page lists this: E-Mail Address - Get a cool 'nsxca.org' e-mail address Do I have one? How do you activate it? Anyone use one?

Today my local dealership called me to ask where I bought my OE 02 sensor I had replaced a couple of weeks ago. Long story made short, he had another NSX in his shop that needed a couple replaced (dealership part is $100 more than I payed). I have lived here for several years and had only seen...

Does anyone know if this manifold cover plate is available in black as shown? It looks like the nsx-r version, but not in the usual red. Maybe it was painted? I really want one if I can find it.

I am looking to start up a small collection of NSX diecast models. Kyosho's and 1/43 Ebbros to start with. If you have an extra you want to sell, let me know. I can trade or partial trade a brand new, assembled but not even tested Yellow XMOD from radio shack. It has the carrying case, extra...

Anyone have a used Hama Video Camera Mount?

Well my CT headers from the NOPI deal got installed today. Everything was going well in the morning until the tech tried to remove the front 02 sensor. I got the call that is was taking longer than normal. I even faxed over some threads from Prime to try to help him. I told him to keep the...

I just stumbled onto this link of a nice garage: http://www.6speedonline.com/forums/showthread.php?threadid=15770&perpage=15&pagenumber=1 I am a sucker for nice garages. Someday ;)

I have my CT headers coming from the NOPI deal. I have been told that I need 2 new gaskets. Which gaskets and does anyone have the part numbers so I can make sure the dealership has them in stock? Tks in advance.

Sold :D I have for sale the adapter cable for adding after market audio equipment to your stock Bose Head Unit. I bought the parts, THE stereo guru made it for me, and I never got it installed.

We removed my diamond audio 10" sub last week from my sub enclosure. It is in like new condition. Model is TM3 10D2. It is a dual 2 ohm unit. The sub just needed a slightly larger box than I had in the NSX. I will ship it to a buyer in the Cont. US for $60. A picture (boxed and ready to go)...

Amp is sold :D My Hifonics 5 ch amp was removed last week is up for sale. $200 shipped in the cont. US. Here are the specs: ZX8000 Hifonics Zeus Amplifier 5 channels 50 watts x 4 channels + 200 watts x 1 channel @ 4 Ohms 100 watts x 4 channels + 300 watts x 1 channel @ 2 Ohms I had no...

I removed my CD changer last week. Model CHM-5620 with magazine and mounting bracket. It is in excellent condition (like new). SOLD 10-18-04. Tks Chris. $150 shipped to you in the cont. US. See the picture in my gallery: http://www.nsxprime.com/photopost/showgallery.php?cat=500&ppuser=8577