Recent content by 2-Saw

  1. 2-Saw

    A/C Question

    Quote Originally Posted by 2-Saw Quote Originally Posted by ralph cerbone Quote Originally Posted by 2-Saw Hey, I appreciate all your help with the A/C. Are you 100% the schrater valve is removeable on the NSX? I have the tool and extra valves. I remember some thread where a guy said you had to...
  2. 2-Saw

    A/C Question

    Thanks guys! I just couldnt wrap my head around an o-ring acting like a one way valve. Cinco de Mayo didnt help much either. I have the dye and will try it. As for the pressure, it always had pressure in it, just not a lot. Needle goes to -30 in about 1 minute with no hesitation. I...
  3. 2-Saw

    A/C Question

    I have a 1991, all original, with R12. My Ac dryer was leaking from the viewport seal, bubbling slowly. I got a new dryer. I evacuated the system, and left the gauges on over the weekend and the pressure kept at -30inHG. Now a yearish later, the a/c has lost pressure again. It still had...
  4. 2-Saw

    Titanium Key Cleaning

    Thanks for the help. My wife suggested I put it in vinegar. Thats how she cleans her jewelry. Let you know in a couple of days.
  5. 2-Saw

    Titanium Key Cleaning

    This may sound a bit OCD, but Im looking for a cleaner to clean up my Titanium key. Simple Green does not do much, and Brasso works better, but how do you get in the grooves to clean it up? Toothbrush? Ultra sonic cleaner? Thanks in advance, Dean
  6. 2-Saw

    A/C Drier

    I got a 4 seasons for 20.00, then found the oem on ebay for 220.00. I have them both, and plan on using the four seasons 1st, incase its not the only leak in the system.
  7. 2-Saw

    A/C Drier

    Thanks Drew.
  8. 2-Saw

    A/C Drier

    I have a small leak in the sight glass of my drier. R 12 is leaking, I mean barely leaking. I was looking for another drier for the future down the road, and my question is this: Do I need to find the OEM drier, or is there a substitute? I have seen a bunch of them that "say" they are...
  9. 2-Saw

    What to clean plastic trim around glass engine canopy with?

    Its great. Its going on all my vehicles now. Really great stuff! Its like Armour All on steroids . I had to apply it twice, but looks great now. Thank you!!
  10. 2-Saw

    What to clean plastic trim around glass engine canopy with?

    That looks good. The plastic is not rubber, but should work the same?
  11. 2-Saw

    What to clean plastic trim around glass engine canopy with?

    Mine is starting to look a little faded, and wanted to rejuvenate the plastic trim. Is there anything someone has used to bring it back to life? - Dean
  12. 2-Saw

    R-12 High Side Fitting Size

    Not that daring in this aluminum can. In a truck/older car probably.
  13. 2-Saw

    R-12 High Side Fitting Size

    Thats pretty smart Drew. If it leaks out again, which I expect it to, I will definitely be converting the system to r134a. Do the 134a adapters screw directly on the existing r 12 inputs, or do I need to evac the system to install them? I f I have to evac, I guess I need some dye to find the...
  14. 2-Saw

    R-12 High Side Fitting Size

    I have a 91, and have never added r12 to it. I have had her since 05. The air has slowly gotten warmer in the last 15 years, and this year it was a little too hot. Found a couple of cans of r-12 on craigslist, bought a manifold gauge set, added 1 can, and now its at 60 degrees from the vent...
Back
Top