Recent content by Bluebeast

Thanks guys. i will put in an order for a new coolant tank and hope that it will solved the problem.

Thanks Rope. i will tried that tomorrow. I also noticed that earlier today, I warm the car up for 15 minutes and had the heater on full and notice the fan did not come on. I then blast the ac on full and still, the fan did not come on. But when i manually tested the fan to the battery it...

So today, I went and checked my coolant reservoir and did not find any small crack where you directed me. Any other suggestion?? Thanks

I will check that and get back with you. hope that is the problem

whats going on guys, I have not been on the forum for quite some time now. I have a problem with my 00 NSX. After a 20 min drive, with the window roll down, i can smell coolant. I decided to stop and take a look at my coolant reservoir and notice that radiator fluid is leaking from the top...

BC 4 me.

YEAR & MODEL (NSX orNSX-T) 2000 NST-T FULL VIN #: JH4NA2169YT000007 CURRENT MILEAGE: 61528 COLOR (EXT/INT): Silver / Black TRANSMISSION: 6-Speed Manual LOCATION OF VEHICLE (CITY/STATE): Merced, California CONTACT VIA (E-mail, PM, phone number, etc.): [email protected] 209-489-7643 PRICE (MUST...

It's me xahmeng. Nice ass ride. We need to get together and have a photo shoot.

Thanks Larry.

Thanks Larry. Do you know exactly what kind of bolt they are and their purpose? I just don't want any oil or fluid surprise coming out while I'm take them off. So far I replaced both the valve cover gasket, cam seals, spool valve, oil sending unit and the vtec seal. Any other ideas where...

Since I have the header off on the front cylinder head, you can clearly see it but I can't figure out what they are called. Hopefully LARRY B. can shine in on this.

I'm not sure about the two screw but the higher arrow that is pointing to the pipe might be the EGR pipe. Someone can correct me on this. Here is a link where I found it from...

ok guys I need some help on identifying these parts. All three parts are in the front of the cylinder head (facing the front bumper). I was changing out my oil pan gasket and notice that there were some oil leaking from the two screw and the unknown part right above the two screw also. So for...

Thanks guys, I guess I'll have to order a pair of 15mm spacer.

That's what was recommended through H&R so I went with it.