Recent content by Kinan

That is correct, you also want to use an antenna with a top loaded coil (since that is the primary radiating element) to get it above the plane of your car - this insures the car can be fully used as a ground plane. If the coil is below the plane of the car, the metal of the car could detune...

1: greenberet 2: deylo 3: Kitaka 4: UnhuZ 5: USAFguy22 6: NSXCessive 7: Allen Shim 8: d.n 9: dirtbag 10: Topvegcal 11: Sylvan 12: CKS Papa 13: Kinan

Dumb question. After hitting the brake pedal?

I originally made a basic seat cushion out of 2" of dense upholstery foam and covered it with black vinyl. For my purposes it worked quite well, gave me lots of headroom and as an added bonus really stuck me into the seat at the track. It felt like I was part of the car. Really nice but I...

GooTube

Fluctuation? Fluck you Americans too!!!

I believe California laws take this problem into consideration and write the laws that say it is legal to continue through the intersection after exercising due caution, if and when the light does not change.I've done this quite a few times without any issues. I always look around for any cops...

San Diego roads can get pretty bumpy in places. I used to run them firmer but got tired of it. On a smooth racetrack, the hardest setting feels like it should be harder!! I couldn't believe the transformation. Plus I like that I can corner balance them very easily once I decide how low to set...

Second on the project Mu. On my third set. Almost no dust, great initial bite, good feel, long lasting, cheaper than oem, no squeal. Great Brakes.

2nd the Tein RAs. Great at the track, just firm enough at the softest setting for street use.

I always answer that I got a great deal.. If they press the issue I say that I got it for $10,000 less than what they were going for at the time, (which was true). I've been asked this too more times than I can count and its worked every time.

http://www.snopes.com/military/reinwald.htm

Thanks, ffffanman. One of mine was blown. Easy fix.

Take a can of WD-40 with the red extension nozzle installed and squirt a thin bead along the center raised piece on both sides of it where it meets the dash along the entire length of it. Wipe up any excess quickly. I've had no squeaks or trouble with this for 5 years now..