acura NSX side vent nut wrench na1/na2

[neonshaun]

This is a little wrench to make removing the side vent nuts easy. It has a hole so you can tie a piece of string on it in case you drop it.

I printed with nylonx so it will last forever with 4 walls and 40% tri infill, but I'm sure any material will work since the nuts aren't THAT tight.

acura NSX side vent nut wrench na1/na2 by neonshaun

This is a little wrench to make removing the side vent nuts easy. It has a hole so you can tie a piece of string on it in case you drop it. I printed with nylonx so it will last forever with 4 walls and 40% tri infill, but I'm sure any material will work since the nuts aren't THAT tight.

www.thingiverse.com

 

[nsxman777]

I need this wrench

 

[superqul]

great! This will help me remove the old side vent s

 

[TANTO]

In my NSX tools i have both a 22mm and a 24mm cut down to about 4" each for special parts - can't remember which is for the vent, but one of them is. If you have any old wrenches around that is an option. Of course you have to use some type of cut off wheel to make one.