Hi
There are a lot of planning behind this. What I did not plan was to have the digicam with me when I first started to install all this. But I used my Nokia E65 and the quality is okey. I will take more pictures probably with a lot better quality next time.
Well here goes:
<img src="http://www.nsxprime.com/photopost/data/1173/medium/16092009_002_.jpg" />
I have more than this to get installed. The 10" Hertz sub is on it's way and will maybe be here tomorrow. It will be in a Zetoolman box.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_003_.jpg" />
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_004_.jpg" />
It was a lot easier to do it like this. Velcro came to my rescue and I think it will work okey. It would have been next to impossible to get the amp mounted with ordinary screws.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009.jpg" />
Here is the 1.5 farad cap. It will be hidden. I am okey with that. Made a custom plate in white which you can see there on the picture.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_006_.jpg" />
Left amp mounted. It is not a showroom installment. I have seen some crazy good installment on this board. But this is okey. The SOS plates are very nice. The cap is behind that and the placement is very good.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_002_.jpg" />
Connectorbox and all the wires is hidden behind the "carpet" over the taillights.
I have a lot of work to do. The right amp which will power the Seas Lotus Ref speakers will be mounted the next time. And all wires will be ready to go through the mid consoll.
I will take some more pictures of where I have the wires and all that. The plan is the same as the SOS installment. Used D'Ecosse's super post here to guide me through this.
In the end I will have 2*150w to the Seas Lotus Ref series speakers. And 1*480w to the Hertz 10" sub in the Zetool box. I already have the Grom Ipod adapter installed behind the drivers seat and the cord in the mid box between the seats.
I am really looking forward to get all things set.
I will update this thread with more pictures in higher quality the next time.
Regards
There are a lot of planning behind this. What I did not plan was to have the digicam with me when I first started to install all this. But I used my Nokia E65 and the quality is okey. I will take more pictures probably with a lot better quality next time.
Well here goes:
<img src="http://www.nsxprime.com/photopost/data/1173/medium/16092009_002_.jpg" />
I have more than this to get installed. The 10" Hertz sub is on it's way and will maybe be here tomorrow. It will be in a Zetoolman box.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_003_.jpg" />
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_004_.jpg" />
It was a lot easier to do it like this. Velcro came to my rescue and I think it will work okey. It would have been next to impossible to get the amp mounted with ordinary screws.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009.jpg" />
Here is the 1.5 farad cap. It will be hidden. I am okey with that. Made a custom plate in white which you can see there on the picture.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_006_.jpg" />
Left amp mounted. It is not a showroom installment. I have seen some crazy good installment on this board. But this is okey. The SOS plates are very nice. The cap is behind that and the placement is very good.
<img src="http://www.nsxprime.com/photopost/data/1173/medium/20092009_002_.jpg" />
Connectorbox and all the wires is hidden behind the "carpet" over the taillights.
I have a lot of work to do. The right amp which will power the Seas Lotus Ref speakers will be mounted the next time. And all wires will be ready to go through the mid consoll.
I will take some more pictures of where I have the wires and all that. The plan is the same as the SOS installment. Used D'Ecosse's super post here to guide me through this.
In the end I will have 2*150w to the Seas Lotus Ref series speakers. And 1*480w to the Hertz 10" sub in the Zetool box. I already have the Grom Ipod adapter installed behind the drivers seat and the cord in the mid box between the seats.
I am really looking forward to get all things set.
I will update this thread with more pictures in higher quality the next time.
Regards
Last edited: