- Joined
- 18 February 2008
- Messages
- 140
Hi Guys
I installed a pair of LED bulbs for my front turn signals and now i have my turn signal hyperflashing. However, when i use the hazard lights function they flash normal. I know this is due to low current draw from the LED bulb turn signal, but not sure how to rectify this problem. I have read that either a load resistor can be used or the flasher relay needs to be upgraded.
Does anyone know how to best fix this on an NSX and where to buy the correct load resistor / flasher relay.
Thanks,
Tom
I installed a pair of LED bulbs for my front turn signals and now i have my turn signal hyperflashing. However, when i use the hazard lights function they flash normal. I know this is due to low current draw from the LED bulb turn signal, but not sure how to rectify this problem. I have read that either a load resistor can be used or the flasher relay needs to be upgraded.
Does anyone know how to best fix this on an NSX and where to buy the correct load resistor / flasher relay.
Thanks,
Tom