Parts for 02 headlight conversion

[Black NSX F1]

Hey guy, I have pretty everything for the bumper conversion. Now I just need to know exactly what do I need for the headlight parts.

what can I reuse and what I need

i have the headlights that came with nothing

i tried searching online but no one says anything about the headlight parts just bumper parts.

thanks!!!

 

[dablackgoku1234]

From what I recall, you will need to buy 2 gaskets for under the headlights, 2 brackets, 4 screws, 2 high beam caps, 2 low beam caps. The SOS headlight mounting brackets, and the RouteKS knob if you dont want to cut the frame.

You can source a aftermarket HID, but the electrical harness you can modify and reuse.

Edit:

71162-SL0-010
71167-SL0-010
33108-S0A-J01 x4
33123-SL0-A01
33173-SL0-A01
33126-SL0-A01 x2
33145-SL0-A01 x2
33127-SL0-A01 x2

https://www.scienceofspeed.com/inde...force-2002-headlight-conversion-hardware.html
http://www.nsxprime.com/forum/showt...dlight-installation-upgrade-(for-conversions)

 

[Black NSX F1]

Thanks man, I actually went with the aftermarket hid harness plug from DOWNFORCE. I'm guessing it's plug and play , no modification as you stated?

 

[dablackgoku1234]

I'm not sure about the Downforce harness. I just used the original from the car. The only modification I did was reverse the wires.

 

[Scrapdog2grand]

If you need an adapter harness for the small marker light hit me up, just made one for Jimmy Pham

 

[nsxtasy]

Could someone please clarify, does the use of these parts mean that you don't need to modify or replace the hood or the bumper? TIA!

 

[Scrapdog2grand]

Could someone please clarify, does the use of these parts mean that you don't need to modify or replace the hood or the bumper? TIA!

you need the 02+ hood and bumper with the headlight conversion, or they need to be modified.

 

[hatchboi]

i decided to put all the item numbers you listed on oemacuraparts.com to see the total compared to the conversion kit that science of speed sells and it comes out cheaper. i was wondering how come you left out the front bumper frame bar and a few other item that are listed on this build http://www.nsxprime.com/forum/showthread.php/115331-02-front-conversion-on-my-brooklands-green. do you not need the other few parts?

From what I recall, you will need to buy 2 gaskets for under the headlights, 2 brackets, 4 screws, 2 high beam caps, 2 low beam caps. The SOS headlight mounting brackets, and the RouteKS knob if you dont want to cut the frame.

You can source a aftermarket HID, but the electrical harness you can modify and reuse.

Edit:

71162-SL0-010
71167-SL0-010
33108-S0A-J01 x4
33123-SL0-A01
33173-SL0-A01
33126-SL0-A01 x2
33145-SL0-A01 x2
33127-SL0-A01 x2

https://www.scienceofspeed.com/inde...force-2002-headlight-conversion-hardware.html
http://www.nsxprime.com/forum/showt...dlight-installation-upgrade-(for-conversions)

 

[dablackgoku1234]

OP asked for headlight parts only...the full list including all the bumper components are:

71140-SL0-010 - frame
71151-SL0-010 - frame top
71152-SL0-020 - frame gasket
71162-SL0-010 - headlight to bumper gasket
71167-SL0-010 - headlight to bumper gasket
71120-SL0-010 - bumper beam bracket
71125-SL0-010 - bumper beam bracket
33123-SL0-A01 - headlight bracket
33173-SL0-A01 - headlight bracket
33108-S0A-J01 x4 - screws for headlight bracket above
33126-SL0-A01 x2 - cap
33145-SL0-A01 x2 - cap gasket
33127-SL0-A01 x2 - cap
02+ bumper
02+ headlights
DF headlight brackets
02+ hood
02+ lip
emblem
D2S HID kit