stock map sensor

[doc_tai]

how many psi I can run on stock map sensor? thanks

 

[angus]

about 11 if using ems , just buy the one that looks like stock but good to 3bar.

 

[doc_tai]

perfect. I only wanna run 9 or 10 psi but too lazy to drop the motor to do the head studs and gaskets.

 

[DDozier]

I found this on another site, not sure if is correct or not, but I believe it is.

1.7 bar MAP sensor (stock Honda sensor): (1.7 - 1) * 14.5 = 10.15 psi

Are you running standalone or FIC?

Dave

 

[ScienceofSpeed]

The OEM sensor is stable up to 10 psi. We offer a plug and play MAP sensor that increases capacity to 28 psi (1 bar negative pressure, 2 bar positive pressure) that fits into the OEM location and uses the factory plug. This sensor is designed for engine management systems that are stand alone that do not have a built in MAP.

http://scienceofspeed.com/products/engine_performance_products/NSX/ScienceofSpeed/MAP_Sensor

cheers,
-- Chris

 

[doc_tai]

I run aem ems. I dont think I wanna to push over 9 psi on a stock pistons

 

[alpha]

I run aem ems. I dont think I wanna to push over 9 psi on a stock pistons

Just be sure your tuner knows this and doesn't try to wing it on a stock map sensor and watches for Engine Load to flat line