Where can I get correct sway bar bushings?

[furinax]

I looked up some info and it looks like the stock numbers are:

1991-1992 NSX: 18.3mm/F 17.5mm/R 1993-1994 NSX-R: 21mm/R - 17.5mm/R
1995-1996 NSX-R: 21mm/F - 19.1mm/R
1997 NSX-S, Zero and Zanardi: 18.3mm/F - 19.1mm/R
1997-2001 NSX: 18.3mm/F - 17.5mm/R
2002-2005 NSX-R: 22.2mm - 17.5mm/R

Source:
http://crxcommunity.com/viewtopic.php?t=7762

Mine is 22.54mm or 0.88740157 inches? Where would I get bushings of this size?

I ordered some moogs (K90580) from rockauto recently and foolishly realized they didn't fit the sway bar AFTER I took the old one off. To think I would have learned my lesson by now...

So where do I get ones in the correct size? The sway bars I have are the Phase 3-hole adjustable sway bars- a Japanese part. Should I just take the old one off and go to a NAPA to get replacements?

 

[mwagner10702]

Try DORMAN 531-755 bushes. They are 22.5mm. Probably as close as you are going to get.

https://www.dormanproducts.com/

 

[furinax]

Nope.... :frown:

I'm just going to grease them up with a thicker grease...

If I brought these bushings into a part store do you think they could find a best fit?