XENON HID 9006+9005 installation?

[strato]

I just ordered the XENON HID 9006-9005 for the headlights of my NSX. Great deals on ebay!

Anyone put these bulbs on their car, an can you please tell me how to do it?

Thanks,

Strato

 

[Lud]

You are talking about just replacement bulbs, not a real full HID setup, correct?

 

[strato]

YES! They can be found at
cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=594914744

What do you think of these replacement bulbs?

Thanks,

Strato

 

[Lud]

I've heard both good and bad about that type of replacement bulb. I've never tried them myself so I don't have an opinion.

But to answer your original question, the instructions for replacing all the interior and exterior light bulbs, including headlights, can be found in your owners manual.

 

[johndoh]

There's been numerous discussions regarding the HID-look bulbs. Hope you'll find your answers there. Also, when replacing your bulbs, make sure you pull off the wire connector first before you take the bulbs off(don't take off the metal clips that hold the bulbs in place). There's not much room in there and not enough slack in the wiring to get 2 hands in there, so it's nearly impossible to pull the connector apart if your bulb's not fastened to the headlight assembly.
http://www.nsxprime.com/ubb/Forum1/HTML/002438.html
http://www.nsxprime.com/ubb/Forum1/HTML/001539.html

 

[strato]

Thank You All! I will inform you when I recive them, and put them on! I must experience these bulb's by myself! If they work as advertised, I will let you all know!

Thanks again,

Strato

NSX RULES!!!

 

[gavin]

I've always been a fan of PIAA foglights and replacement bulbs but I figured I was going to get true HID eventually so why spend the money. I ended up just getting this pair of cheapeez and they actually worked great.

The thing to consider when buying these bulbs is that yes they will make the road a little more visible, but the biggest impact is the appearance to other drivers. If you are motivated by the visibility factor, you should just save your money and invest in the real HID (Something I haven't been able to do myself yet)

The replacement bulbs though are much easier to install.

 

[Yawwn]

Hello All,
I was wondering if it is possible to adjust the beam pattern so that it points a little lower. I find that my beams are too high, so that I cannot see much of the road that is a few feet away from the front bumper. I cannot find the information in my manual.

Thanks!